leeknight1981 Posted March 16, 2021 Share Posted March 16, 2021 i Guy's as usual when i am away i have issue's lol Never when i am home with he server i think she likes to punish me for being away XD So i ran a Non Correcting Parity Scan and it retuned about 2500 ish sync errors So i shut the server down and ra an Error Correcting Scan and that returned the same value XD So i shut the server down left it over night and its 50% threw another parity scan and showing 336 errors so far. Ill attach logs so peoples can have a look for me as i cba do all that digging on an ipad screen, If someone can give me an idea of what or where to look Which disk etc from the logs, Server hasn't moved its a R720XD with all drives fixed in drive trays. TIA L33 libvirt.txt docker.txt vfio-pci.txt syslog.txt 35000c5006528dea3-20210315-1638 disk2 (sdd).txt 35000cca291c6b6cb-20210315-1638 parity (sdb).txt 35000c5006d5861c8-20210315-1638 disk3 (sde).txt 35000c500bf23945e-20210315-1638 disk7 (sdj).txt 35000c500beab9f32-20210315-1638 disk6 (sdi).txt 35000cca28ed4ae4d-20210315-1638 disk1 (sdc).txt 3500a0751e2077dd8-20210315-1638 (sdl).txt 35000cca2a3e27058-20210315-1638 parity2 (sdm).txt 35000c500a5e3a832-20210315-1638 disk5 (sdg).txt 35000c500bf08cd01-20210315-1638 disk8 (sdh).txt 35002538e49b06602-20210315-1638 cache (sdo).txt 35000c50087f56c95-20210315-1638 disk9 (sdk).txt 35002538e49b06ae3-20210315-1638 cache2 (sdn).txt 35000c50087c020ef-20210315-1638 disk4 (sdf).txt Quote Link to comment
leeknight1981 Posted March 17, 2021 Author Share Posted March 17, 2021 After 3rd parity scan last 2 was error correcting. Any one able to have a look for me please TI A Lee r720xd-diagnostics-20210316-2341.zip Quote Link to comment
JorgeB Posted March 17, 2021 Share Posted March 17, 2021 I only see a non correcting check in the diags, run two correcting checks without rebooting, then post new diags. Quote Link to comment
leeknight1981 Posted March 17, 2021 Author Share Posted March 17, 2021 Ok so i understand you! You want me to run another Correcting without rebooting? I have ran 1 non correcting and then 2 correcting and the 2 correcting have shown 2 different sync errors. is it safe to run 4 in a week lol Many Thanks Lee Quote Link to comment
JorgeB Posted March 17, 2021 Share Posted March 17, 2021 1 hour ago, leeknight1981 said: You want me to run another Correcting without rebooting? Two correcting checks, one after the other, without rebooting. Quote Link to comment
leeknight1981 Posted March 17, 2021 Author Share Posted March 17, 2021 4 minutes ago, JorgeB said: Two correcting checks, one after the other, without rebooting. Defo rebooted between 2nd and 3rd i shall stop everything and shut the 720 down now via idrac and then re boot it and start another scan, Then come back and let you know in a day or two Lol Quote Link to comment
leeknight1981 Posted March 18, 2021 Author Share Posted March 18, 2021 (edited) scan has not yet completed 66.8% and there is 667 sync errors my Server was deffo gracefully shut down before this new scan as i had to kick my mom off Emby briefly r720xd-diagnostics-20210318-0755.zip Edited March 18, 2021 by leeknight1981 Quote Link to comment
leeknight1981 Posted March 18, 2021 Author Share Posted March 18, 2021 Ok scan finished, Server was rebooted prior to this scan Last check completed on Thursday, 18.03.2021, 18:03 (today) Finding 677 errors Duration: 1 day, 6 hours, 34 minutes, 2 seconds. Average speed: 109.1 MB/sec Many Thanks Lee r720xd-diagnostics-20210318-1811.zip Quote Link to comment
JorgeB Posted March 18, 2021 Share Posted March 18, 2021 There's only one parity check. On 3/17/2021 at 10:38 AM, JorgeB said: Two correcting checks, one after the other, without rebooting. Quote Link to comment
leeknight1981 Posted March 18, 2021 Author Share Posted March 18, 2021 2 minutes ago, JorgeB said: There's only one parity check. Iv ran 4 in the past week there all above each giving a different amount of errors with re booting without re booting. So not really sure what to do next! 2 minutes ago, JorgeB said: Quote Link to comment
JorgeB Posted March 18, 2021 Share Posted March 18, 2021 You posted one log showing a non correcting check, I asked for two consecutive correcting checks to compare the errros, you posted only one, I'm not asking again, it's up to you if you want to continue. Quote Link to comment
leeknight1981 Posted March 18, 2021 Author Share Posted March 18, 2021 i am just concerned about running so many parity scans in a week iv done 4 already is it safe? seems a lot of stress on the drives, ok ill start another scan now Quote Link to comment
JorgeB Posted March 18, 2021 Share Posted March 18, 2021 11 minutes ago, leeknight1981 said: is it safe? It's fine, if any disk fails now it would fail soon anyway. Quote Link to comment
leeknight1981 Posted March 18, 2021 Author Share Posted March 18, 2021 Sorry didn’t mean to be short with you there’s years of my life on there like 10 years and currently it’s my only copy due to COVID. Where or what am I looking for in the logs? I’d like to be able to understand instead of trying to sort it during work and hectic life. I started another at 1950 so I guess have to wait another 24 ish hours and prey a drive doesn’t fail but hey ho of it fails I’ll swap it with a 12 cheers Quote Link to comment
JorgeB Posted March 19, 2021 Share Posted March 19, 2021 I just want to see if the errors are in the same sectors or not, if it starts finding errors you don't need to let it finish since only the first ones will be logged, e.g., previous one: Mar 17 11:29:51 R720XD kernel: md: recovery thread: check P Q ... ... Mar 18 00:33:05 R720XD kernel: md: recovery thread: stopped logging It stopped logging after 13 hours or so, you can stop the current one when it also stops logging (assuming errors are found), then post diags. Quote Link to comment
leeknight1981 Posted March 20, 2021 Author Share Posted March 20, 2021 Ok thats returned 0 sync errors So is the way forward if i run it every 3 months and it shows sync errors Do i simply run it again error correcting with no reboot? Was there actual errors and now showing 0 as its corrected then or did it think they was errors and is now happy there isn't. Many Thanks for your help with this i just do not Get the time to sort stuff out research stuff i am always working and rarely at home with the server and when i am at home its family time XD r720xd-diagnostics-20210320-0854.zip Quote Link to comment
JorgeB Posted March 20, 2021 Share Posted March 20, 2021 OK, now wait for the next scheduled check and see how that one goes, and make sure no unclean shutdowns in between, as a few errors after one are normal. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.