droopie Posted March 18, 2021 Share Posted March 18, 2021 Last night, unraid was on without much going on. I put on a movie and noticed it was lagging so I checked unraid. Parity disk was throwing out errors then got disabled and the lag stopped. I got the diagnostic to see if you can spot anything causing the issue this time. server-diagnostics-20210317-2352.zip Quote Link to comment
droopie Posted March 18, 2021 Author Share Posted March 18, 2021 (edited) Since this has happened before, I did what support said and checked the cables and tried different once. I turned off the array and deselected the parity 2 disk then started the array. Then turned it off again and reassigned it. The parity build was working till another disk got disabled but parity 2 is still being built. Since disk 4 got disabled during parity 2 rebuild, is the next step let it finish rebuilding parity 2 then troubleshoot the same again for disk 4? Attached the newest diag server-diagnostics-20210318-1320.zip Edited March 18, 2021 by droopie Quote Link to comment
JorgeB Posted March 18, 2021 Share Posted March 18, 2021 Yes, these look more like a connection/power problem. Mar 18 02:32:02 Server kernel: sd 7:0:2:0: Power-on or device reset occurred You can wait for parity2 to finish syncing before dealing with the other one, but also need to find out what's causing the problems, I would start with replacing the miniSAS cables and if that doesn't help try a different PSU if available, or another HBA. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.