Viper82 Posted March 19, 2021 Share Posted March 19, 2021 Hi, I use a usb drive to backup my share once a week. Its a usb i use for other machines to take backups. The usb drive has been fine up to now and still works in the other machines but in the last few days it wont mount on unraid saying in the log its already mounted. I think i must have disconnected it previously without a clean unmount. Is there a way of fixing this without rebooting the server? Ive tested my other usb drive which is the same usb model and that one mounts fine on unraid. Im still on 6.8.3 at the moment on my HPZ620. Diags attached. Mar 18 16:42:40 Tower kernel: usb 3-2.1: new high-speed USB device number 10 using xhci_hcd Mar 18 16:42:40 Tower kernel: usb-storage 3-2.1:1.0: USB Mass Storage device detected Mar 18 16:42:40 Tower kernel: scsi host0: usb-storage 3-2.1:1.0 Mar 18 16:42:41 Tower kernel: scsi 0:0:0:0: Direct-Access Seagate Expansion Desk 0915 PQ: 0 ANSI: 6 Mar 18 16:42:41 Tower kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Mar 18 16:42:53 Tower kernel: sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). Mar 18 16:42:53 Tower kernel: sd 0:0:0:0: [sda] 11721045167 512-byte logical blocks: (6.00 TB/5.46 TiB) Mar 18 16:42:53 Tower kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks Mar 18 16:42:53 Tower kernel: sd 0:0:0:0: [sda] Write Protect is off Mar 18 16:42:53 Tower kernel: sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08 Mar 18 16:42:53 Tower kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 18 16:42:54 Tower kernel: sda: sda1 sda2 Mar 18 16:42:54 Tower kernel: sd 0:0:0:0: [sda] Attached SCSI disk Mar 18 16:42:54 Tower rc.diskinfo[8929]: SIGHUP received, forcing refresh of disks info. Mar 18 16:42:54 Tower unassigned.devices: Adding disk '/dev/sda1'... Mar 18 16:42:54 Tower unassigned.devices: No filesystem detected on '/dev/sda1'. Mar 18 16:42:54 Tower unassigned.devices: Partition 'ST6000DM003-2CY186_ZF302PAK-part1' cannot be mounted. Mar 18 16:42:54 Tower unassigned.devices: Adding disk '/dev/sda2'... Mar 18 16:42:54 Tower unassigned.devices: Drive '/dev/sda2' already mounted. Mar 18 16:47:45 Tower kernel: usb 3-2.1: USB disconnect, device number 10 Mar 18 16:47:45 Tower kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache Mar 18 16:47:45 Tower kernel: sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00 Mar 18 16:47:45 Tower rc.diskinfo[8929]: SIGHUP received, forcing refresh of disks info. tower-diagnostics-20210319-0904.zip Quote Link to comment
JorgeB Posted March 19, 2021 Share Posted March 19, 2021 1 minute ago, ViperSuicide said: Is there a way of fixing this without rebooting the server? Unlikely. Quote Link to comment
Viper82 Posted March 19, 2021 Author Share Posted March 19, 2021 What is the safest way to reboot? Manually stop Vms and dockers first or just use the reboot option in the gui without manually stopping anything? I dont reboot very often unless i have to. Quote Link to comment
JorgeB Posted March 19, 2021 Share Posted March 19, 2021 GUI reboot might work but depends on how your VMs are configured and the set timeout, if possible always best to stop them first, dockers should not be a problem. Quote Link to comment
Viper82 Posted March 20, 2021 Author Share Posted March 20, 2021 Stopped the VM and rebooted and all seems ok now. I have the unraid upgrade to do next. 6.8.3 to 6.9.1. Is there anything i need to be aware of before doing the upgrade? I have a backup of the usb. Is it quick and simple like the plugin upgrades just with a reboot? Then if there is an issue, is the rollback just copy the backup usb files over the top of the new and reboot again? Quote Link to comment
JorgeB Posted March 20, 2021 Share Posted March 20, 2021 5 minutes ago, ViperSuicide said: Is there anything i need to be aware of before doing the upgrade? Always good to read the release notes. 5 minutes ago, ViperSuicide said: Is it quick and simple like the plugin upgrades just with a reboot? Then if there is an issue, is the rollback just copy the backup usb files over the top of the new and reboot again? Usually yes. Quote Link to comment
Viper82 Posted March 27, 2021 Author Share Posted March 27, 2021 On 3/20/2021 at 9:01 AM, JorgeB said: Always good to read the release notes. Usually yes. Upgrade complete. I’ll leave this video here in case it helps anyone else regarding the upgrade process Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.