Officero Posted March 24, 2021 Share Posted March 24, 2021 I had a parity error in a previous post. I believed it to be a cabling issue on Drive 1 based on a helpful member's feedback, so I swapped Drive 1's SATA cable. I couldn't easily swap the power cable, so I moved Drive 1 to an unused slot with a different power and SATA cable. Ran parity check, wrote to parity, everything chugged along for a month. This morning, I wake up to parity errors. I probably need to order more cables, I guess. But I've replaced them all once. tower-diagnostics-20210324-0825.zip Quote Link to comment
JorgeB Posted March 24, 2021 Share Posted March 24, 2021 Disk disconnected and reconnected again, this is usually a connection/power problem. Quote Link to comment
Officero Posted March 24, 2021 Author Share Posted March 24, 2021 5 minutes ago, JorgeB said: Disk disconnected and reconnected again, this is usually a connection/power problem. Thank you. Could you tell if that was Disk0 or Disk1? Quote Link to comment
JorgeB Posted March 24, 2021 Share Posted March 24, 2021 I saw parity, disk0, didn't check for more disk errors after that. Quote Link to comment
Officero Posted March 24, 2021 Author Share Posted March 24, 2021 1 minute ago, JorgeB said: I saw parity, disk0, didn't check for more disk errors after that. That's all I needed to hear. Thanks! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.