geekmay Posted May 2, 2021 Share Posted May 2, 2021 Hey folks, I have been using 2 NICs (one on-board and one USB) to segregate my network bandwidth. Primary connection for regular access and a special internet connection dedicated to the downloaders. I had setup eth0 as the primary one with br0 and the downloading network was eth1 and br1. On the network settings page, I was able to make changes such as IP assignment, bridge settings, etc. to both the interfaces when I was on 6.8.3. I updated to 6.9.2 today and I can see the settings for the eth1 interface seems to be vanished and replaced with the Interface Rules option in the Network settings. I have attached the screenshot of this. Due to this, most of my containers stopped working and I am not able to use the second internet connection. Can anyone please help out with this? Thanks! Quote Link to comment
JorgeB Posted May 3, 2021 Share Posted May 3, 2021 Delete/rename network.cfg and network-rules.cfg in the flash drive and reboot, if after that it still doesn't come up please post the diagnostics: Tools -> Diagnostics Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.