Anstilion Posted June 9, 2021 Share Posted June 9, 2021 Hey guys, I have a Toshiba N300 disk in the 2nd parity slot that is failing, generating more and more bad sectors. Can I just shut down the array, take it out and power up the array again, or do I need to do something else? Did not plan to buy another disk to replace it at this time, but if I have to do that to use the unraid array while waiting for repair/replacement I will. Quote Link to comment
JorgeB Posted June 9, 2021 Share Posted June 9, 2021 7 minutes ago, Anstilion said: Can I just shut down the array, take it out and power up the array again, or do I need to do something else? Yes, depending on Unraid release you might need to check a box before array start. 1 Quote Link to comment
Anstilion Posted June 9, 2021 Author Share Posted June 9, 2021 I'm on 6.9.1. Thanks! So I will be able to run the array as normal with single drive redundancy while waiting for replacement, Although it was originally set up with two drive redundancy? Quote Link to comment
JorgeB Posted June 9, 2021 Share Posted June 9, 2021 2 minutes ago, Anstilion said: Although it was originally set up with two drive redundancy? Yep. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.