Ndgame Posted June 24, 2021 Share Posted June 24, 2021 I am having a problem with my Unraid server to where if I start using a share or scanning files or accessing a share that it stops responding and when I go into unraid click shares they are completely disappearing. If I stop the array and restart it the shares show back up. I have attached my Diag file and could use some help to figure out what is going on. Thanks, tower-diagnostics-20210624-1032.zip Quote Link to comment
itimpi Posted June 24, 2021 Share Posted June 24, 2021 Looks like you have file system corruption I would suggest running a file system check/repair on all your drives. Quote Link to comment
Ndgame Posted June 24, 2021 Author Share Posted June 24, 2021 What is the simplest way to do that and unread Quote Link to comment
itimpi Posted June 24, 2021 Share Posted June 24, 2021 1 minute ago, Ndgame said: What is the simplest way to do that and unread You can do it from the GUI by clicking on the drive on the Main tab. For XFS file systems the array needs to be running in Maintenance mode while BTRFS is done from normal mode. Quote Link to comment
JorgeB Posted June 24, 2021 Share Posted June 24, 2021 Problem is with disk1: Jun 24 07:22:43 Tower kernel: XFS (md1): Corruption detected. Unmount and run xfs_repair Quote Link to comment
Ndgame Posted June 25, 2021 Author Share Posted June 25, 2021 Ok so I have checked all disk and I formatted disk 1. I started a parity check and about 4 hours in the server shutdowns. I have attached another diag file. Any help with this would be greatly appreciated. tower-diagnostics-20210624-2117.zip Quote Link to comment
JorgeB Posted June 25, 2021 Share Posted June 25, 2021 5 hours ago, Ndgame said: I started a parity check and about 4 hours in the server shutdowns. If the server shutdown on its own it suggests a hardware problem, start by checking cooling and temperatures, could also be the power supply. Quote Link to comment
Ndgame Posted June 25, 2021 Author Share Posted June 25, 2021 Sorry I said shit down but what it did was locked up and I had to hard reboot it. Quote Link to comment
JorgeB Posted June 25, 2021 Share Posted June 25, 2021 If it keeps crashing enable syslog mirror to flash then post that log after a crash. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.