July 21, 20214 yr Hi. I just installed unRAID on my recent build. Trying to create an array with all HDDs, 1 SSD for cache and 1 unused SSD. However I am unable to sync my parity disk because of a disk error. The disks were working fine under TrueNAS SCALE. Output of diagnostics is attached below. Edited July 22, 20214 yr by EricZhang456 remove diagnosis for privacy
July 21, 20214 yr It looks as if all the drives have dropped offline. This suggests it is something that is common to all the drives such as the power, disk controller, etc
July 21, 20214 yr It's not a disk problem, all disks connected to the JMicron controllers are timing out: Jul 21 04:34:50 Tower kernel: ata9: hard resetting link Jul 21 04:35:00 Tower kernel: ata10: softreset failed (device not ready) Jul 21 04:35:00 Tower kernel: ata10: hard resetting link Jul 21 04:35:00 Tower kernel: ata11: softreset failed (device not ready) Jul 21 04:35:00 Tower kernel: ata11: hard resetting link Jul 21 04:35:00 Tower kernel: ata9: softreset failed (device not ready) Jul 21 04:35:00 Tower kernel: ata9: hard resetting link Jul 21 04:35:00 Tower kernel: ata7: softreset failed (device not ready) Jul 21 04:35:00 Tower kernel: ata7: hard resetting link Jul 21 04:35:00 Tower kernel: ata8: softreset failed (device not ready) Jul 21 04:35:00 Tower kernel: ata8: hard resetting link Jul 21 04:35:10 Tower kernel: ata10: softreset failed (device not ready) Jul 21 04:35:10 Tower kernel: ata10: hard resetting link Jul 21 04:35:10 Tower kernel: ata9: softreset failed (device not ready) Jul 21 04:35:10 Tower kernel: ata9: hard resetting link Jul 21 04:35:10 Tower kernel: ata11: softreset failed (device not ready) Jul 21 04:35:10 Tower kernel: ata11: hard resetting link Jul 21 04:35:10 Tower kernel: ata7: softreset failed (device not ready) Jul 21 04:35:10 Tower kernel: ata7: hard resetting link Jul 21 04:35:10 Tower kernel: ata8: softreset failed (device not ready) Jul 21 04:35:10 Tower kernel: ata8: hard resetting link These controllers usually work great with Unraid, how are the disks powered?
July 21, 20214 yr Author 2 minutes ago, JorgeB said: It's not a disk problem, all disks connected to the JMicron controllers are timing out: Jul 21 04:34:50 Tower kernel: ata9: hard resetting link Jul 21 04:35:00 Tower kernel: ata10: softreset failed (device not ready) Jul 21 04:35:00 Tower kernel: ata10: hard resetting link Jul 21 04:35:00 Tower kernel: ata11: softreset failed (device not ready) Jul 21 04:35:00 Tower kernel: ata11: hard resetting link Jul 21 04:35:00 Tower kernel: ata9: softreset failed (device not ready) Jul 21 04:35:00 Tower kernel: ata9: hard resetting link Jul 21 04:35:00 Tower kernel: ata7: softreset failed (device not ready) Jul 21 04:35:00 Tower kernel: ata7: hard resetting link Jul 21 04:35:00 Tower kernel: ata8: softreset failed (device not ready) Jul 21 04:35:00 Tower kernel: ata8: hard resetting link Jul 21 04:35:10 Tower kernel: ata10: softreset failed (device not ready) Jul 21 04:35:10 Tower kernel: ata10: hard resetting link Jul 21 04:35:10 Tower kernel: ata9: softreset failed (device not ready) Jul 21 04:35:10 Tower kernel: ata9: hard resetting link Jul 21 04:35:10 Tower kernel: ata11: softreset failed (device not ready) Jul 21 04:35:10 Tower kernel: ata11: hard resetting link Jul 21 04:35:10 Tower kernel: ata7: softreset failed (device not ready) Jul 21 04:35:10 Tower kernel: ata7: hard resetting link Jul 21 04:35:10 Tower kernel: ata8: softreset failed (device not ready) Jul 21 04:35:10 Tower kernel: ata8: hard resetting link These controllers usually work great with Unraid, how are the disks powered? Using the drive caddy in my Sliverstone case Edited July 21, 20214 yr by EricZhang456 add details
July 21, 20214 yr 6 minutes ago, EricZhang456 said: Using the drive caddy in my Sliverstone case How is the backplane powered ? Do you have all power connectors in ? Are you using splitters ?
July 21, 20214 yr Author 1 minute ago, ChatNoir said: How is the backplane powered ? Do you have all power connectors in ? Are you using splitters ? It's powered with 3 SATA power connectors (2 of them are using splitters) and a sperate molex power connector. All power connectors are plugged in.
July 21, 20214 yr Try connecting some of the disks to the onboard SATA controller, then try again to see if the errors stay with the JMB controller.
July 22, 20214 yr 6 hours ago, EricZhang456 said: Problem is now fixed. Thanks For other users that may have a similar problem in the future, what was your issue ?
July 22, 20214 yr Author I don't really know actually. I just have this problem randomly and searching doesn't do much.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.