DivideBy0 Posted September 5, 2021 Share Posted September 5, 2021 Building my 3rd unbraid box on a monster 16 cores Xeon Gold 2nd generation and Supermicro X11SPM-F board. I installed 6.10 and seems to run fine. Before I close this box and set it, is the MegaRAID SAS 9361-16i SAS controller good for UnRaid. I pulled this from a Sun box and flashed with the Broadcom firmware. I run the SAS/SATA drives in JBOD mode (similar with IT) and I can detect the SAS/SATA drives just fine with no errors. Built an array and no errors, all look clean. I will attach the diagnostic file if you can spot any issues before I proceed with this setup. Thanks in advance tower-diagnostics-20210905-1302.zip Quote Link to comment
JorgeB Posted September 6, 2021 Share Posted September 6, 2021 RAID controllers are not recommended. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.