jsN Posted September 9, 2021 Share Posted September 9, 2021 Hi! I've just discovered that my Parity 2 disk has been disabled and is in error state 07-09-2021 18:50Unraid Parity 2 errorAlert [TOWER] - Parity 2 in error state (disk dsbl)MB3000FCWDH_Z1Z0VEQ50000C348AX17_35000c50056c10d63 (sdm) Surprised I haven't noticed sooner! On the day that the drive has been disabled I did replace my CPU coolers so it's possible I've knocked the cabling a little and I know the temperatures are rather high (hot weather at the moment). I've attached the diagnostics log, would anyone be able to help determined if the disk is at fault or possibly just been disabled because of cabling or something? Thanks! tower-diagnostics-20210909-1149.zip Quote Link to comment
JorgeB Posted September 9, 2021 Share Posted September 9, 2021 Looks more like a connection problem, check/replace cables and re-sync. 7 minutes ago, jsN said: Surprised I haven't noticed sooner! Make sure you enable system notifications. Quote Link to comment
jsN Posted September 9, 2021 Author Share Posted September 9, 2021 33 minutes ago, JorgeB said: Looks more like a connection problem, check/replace cables and re-sync. How would I do this? Shutdown, check cabling and boot again? 33 minutes ago, JorgeB said: Make sure you enable system notifications. Usually is, looks like I may have changed permissions on Gmail and it's being blocked Quote Link to comment
JorgeB Posted September 9, 2021 Share Posted September 9, 2021 15 minutes ago, jsN said: Shutdown, check cabling and boot again? Yes, check/replace/swap. Quote Link to comment
jsN Posted September 9, 2021 Author Share Posted September 9, 2021 Thanks JorgeB! I did notice a little kink on one of the cables, hopefully it was just this, currently resyncing/building so fingers crossed Quote Link to comment
JorgeB Posted September 9, 2021 Share Posted September 9, 2021 👍 Those bar colors hurt my eyes 1 Quote Link to comment
jsN Posted September 9, 2021 Author Share Posted September 9, 2021 Ok just hit the same problem, disk has disabled itself and showing errors Could this just be the cable possibly damaged because of the kink or do I have a failing disk? - Attached logs tower-diagnostics-20210909-1430.zip Quote Link to comment
jsN Posted September 9, 2021 Author Share Posted September 9, 2021 1 minute ago, JorgeB said: 👍 Those bar colors hurt my eyes I'm not a fan either, rest of the theme though I like Quote Link to comment
JorgeB Posted September 9, 2021 Share Posted September 9, 2021 15 minutes ago, jsN said: Could this just be the cable possibly damaged because of the kink or do I have a failing disk? Replace the cable or swap with parity1 and try again. Quote Link to comment
jsN Posted September 9, 2021 Author Share Posted September 9, 2021 1 hour ago, JorgeB said: Replace the cable or swap with parity1 and try again. Thanks JorgeB, I was unable to swap cables between parity1 with 2 due to the internal layout - parity1 connects to 1 HBA and parity2 connects to another on separate fan out cables with restrictions between the disks so it's a little awkward to do this. I've replaced the disks cable with a spare off the same SAS fan out and currently rebuilding. If this isn't successful should I replace the disk and try again? Quote Link to comment
JorgeB Posted September 9, 2021 Share Posted September 9, 2021 40 minutes ago, jsN said: If this isn't successful should I replace the disk and try again? You should also replace/swap power cable first. Quote Link to comment
jsN Posted September 10, 2021 Author Share Posted September 10, 2021 16 hours ago, JorgeB said: You should also replace/swap power cable first. Thank you JorgeB, server is back up and running in a healthy state Seems the kink was the issue and possibly damaged the internals of the cable. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.