nametaken_thisonetoo Posted September 20, 2021 Share Posted September 20, 2021 Hi there, This error has popped up in my syslog and although I found an old thread covering it, there was no resolution contained within. So I thought I'd see if anyone else out there has had this recently, and if so, what they did to resolve the problem. Thanks in advance. Diagnostics attached and syslog excerpt is immediately below: Sep 19 16:44:23 TheMagicEye kernel: ata11.00: exception Emask 0x10 SAct 0x1f8 SErr 0xba0100 action 0x6 Sep 19 16:44:23 TheMagicEye kernel: ata11.00: irq_stat 0x08000000 Sep 19 16:44:23 TheMagicEye kernel: ata11: SError: { UnrecovData PHYInt 10B8B Dispar BadCRC LinkSeq } Sep 19 16:44:23 TheMagicEye kernel: ata11.00: failed command: READ FPDMA QUEUED Sep 19 16:44:23 TheMagicEye kernel: ata11.00: cmd 60/40:18:50:72:56/05:00:4d:04:00/40 tag 3 ncq dma 688128 in Sep 19 16:44:23 TheMagicEye kernel: res 40/00:00:90:8c:56/00:00:4d:04:00/40 Emask 0x10 (ATA bus error) Sep 19 16:44:23 TheMagicEye kernel: ata11.00: status: { DRDY } Sep 19 16:44:23 TheMagicEye kernel: ata11.00: failed command: READ FPDMA QUEUED Sep 19 16:44:23 TheMagicEye kernel: ata11.00: cmd 60/40:20:90:77:56/05:00:4d:04:00/40 tag 4 ncq dma 688128 in Sep 19 16:44:23 TheMagicEye kernel: res 40/00:00:90:8c:56/00:00:4d:04:00/40 Emask 0x10 (ATA bus error) Sep 19 16:44:23 TheMagicEye kernel: ata11.00: status: { DRDY } Sep 19 16:44:23 TheMagicEye kernel: ata11.00: failed command: READ FPDMA QUEUED Sep 19 16:44:23 TheMagicEye kernel: ata11.00: cmd 60/40:28:d0:7c:56/05:00:4d:04:00/40 tag 5 ncq dma 688128 in Sep 19 16:44:23 TheMagicEye kernel: res 40/00:00:90:8c:56/00:00:4d:04:00/40 Emask 0x10 (ATA bus error) Sep 19 16:44:23 TheMagicEye kernel: ata11.00: status: { DRDY } Sep 19 16:44:23 TheMagicEye kernel: ata11.00: failed command: READ FPDMA QUEUED Sep 19 16:44:23 TheMagicEye kernel: ata11.00: cmd 60/40:30:10:82:56/05:00:4d:04:00/40 tag 6 ncq dma 688128 in Sep 19 16:44:23 TheMagicEye kernel: res 40/00:00:90:8c:56/00:00:4d:04:00/40 Emask 0x10 (ATA bus error) Sep 19 16:44:23 TheMagicEye kernel: ata11.00: status: { DRDY } Sep 19 16:44:23 TheMagicEye kernel: ata11.00: failed command: READ FPDMA QUEUED Sep 19 16:44:23 TheMagicEye kernel: ata11.00: cmd 60/40:38:50:87:56/05:00:4d:04:00/40 tag 7 ncq dma 688128 in Sep 19 16:44:23 TheMagicEye kernel: res 40/00:00:90:8c:56/00:00:4d:04:00/40 Emask 0x10 (ATA bus error) Sep 19 16:44:23 TheMagicEye kernel: ata11.00: status: { DRDY } Sep 19 16:44:23 TheMagicEye kernel: ata11.00: failed command: READ FPDMA QUEUED Sep 19 16:44:23 TheMagicEye kernel: ata11.00: cmd 60/90:40:90:8c:56/00:00:4d:04:00/40 tag 8 ncq dma 73728 in Sep 19 16:44:23 TheMagicEye kernel: res 40/00:00:90:8c:56/00:00:4d:04:00/40 Emask 0x10 (ATA bus error) Sep 19 16:44:23 TheMagicEye kernel: ata11.00: status: { DRDY } Sep 19 16:44:23 TheMagicEye kernel: ata11: hard resetting link Sep 19 16:44:23 TheMagicEye kernel: ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Sep 19 16:44:23 TheMagicEye kernel: ata11.00: supports DRM functions and may not be fully accessible Sep 19 16:44:23 TheMagicEye kernel: ata11.00: supports DRM functions and may not be fully accessible Sep 19 16:44:23 TheMagicEye kernel: ata11.00: configured for UDMA/133 Sep 19 16:44:23 TheMagicEye kernel: ata11: EH complete themagiceye-diagnostics-20210919-2034.zip Quote Link to comment
JorgeB Posted September 20, 2021 Share Posted September 20, 2021 Replace SATA cable. 1 Quote Link to comment
nametaken_thisonetoo Posted September 20, 2021 Author Share Posted September 20, 2021 15 hours ago, JorgeB said: Replace SATA cable. Thanks for the reply. Can I ask how you are able to work this out? Would be great if I could fix this sort of thing myself in the future. Quote Link to comment
JorgeB Posted September 21, 2021 Share Posted September 21, 2021 On 9/20/2021 at 5:03 AM, nametaken_thisonetoo said: BadCRC This indicates a CRC error, 9 times out of 10 it's a bad SATA cable. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.