Fozzie Posted September 28, 2021 Share Posted September 28, 2021 I had an unclean shut down yesterday even thought I had a ups. Now I have 2 unmountable disks, I have enclosed a before diag and an after. Some assistance would be appreciated. tower-diagnostics-20210726-2139.zip tower-diagnostics-20210928-1533.zip Quote Link to comment
JorgeB Posted September 29, 2021 Share Posted September 29, 2021 Log is filled with ATA errors for multiple devices similar to these: Sep 28 13:58:22 Tower kernel: ata10: softreset failed (1st FIS failed) Sep 28 13:58:29 Tower kernel: ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Sep 28 13:58:29 Tower kernel: ata10.00: ATA-10: ST12000VN0007-2GS116, ZJV05NBM, SC60, max UDMA/133 Sep 28 13:58:29 Tower kernel: ata10.00: 23437770752 sectors, multi 16: LBA48 NCQ (depth 32), AA Sep 28 13:58:29 Tower kernel: ata10.00: configured for UDMA/133 Sep 28 13:58:29 Tower kernel: scsi 10:0:0:0: Direct-Access ATA ST12000VN0007-2G SC60 PQ: 0 ANSI: 5 Sep 28 13:58:29 Tower kernel: sd 10:0:0:0: Attached scsi generic sg7 type 0 Sep 28 13:58:29 Tower kernel: sd 10:0:0:0: [sdh] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) Sep 28 13:58:29 Tower kernel: sd 10:0:0:0: [sdh] 4096-byte physical blocks Sep 28 13:58:29 Tower kernel: sd 10:0:0:0: [sdh] Write Protect is off Sep 28 13:58:29 Tower kernel: sd 10:0:0:0: [sdh] Mode Sense: 00 3a 00 00 Sep 28 13:58:29 Tower kernel: sd 10:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 28 13:58:29 Tower kernel: ata10.00: exception Emask 0x10 SAct 0x4000 SErr 0x90202 action 0xe frozen Sep 28 13:58:29 Tower kernel: ata10.00: irq_stat 0x00400000, PHY RDY changed Sep 28 13:58:29 Tower kernel: ata10: SError: { RecovComm Persist PHYRdyChg 10B8B } Sep 28 13:58:29 Tower kernel: ata10.00: failed command: READ FPDMA QUEUED Sep 28 13:58:29 Tower kernel: ata10.00: cmd 60/08:70:00:00:00/00:00:00:00:00/40 tag 14 ncq dma 4096 in Sep 28 13:58:29 Tower kernel: res 40/00:70:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Sep 28 13:58:29 Tower kernel: ata10.00: status: { DRDY } Sep 28 13:58:29 Tower kernel: ata10: hard resetting link Check/replace all cables on the affected disks, including power, power back up and see if the errors went way, or post new diags. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.