Deznuts05 Posted October 20, 2021 Share Posted October 20, 2021 I've recently shucked my Seagate Desktop Drive; which was loaded with a Seagate ST8000DM004. When I install the drive into the server like the other drives in my case, unraid doesn't seem to detect the drive. I've attempted the 3.3v mod with no such luck. I was able to get unraid to detect the drive if I connect it via a USB Sata Dock. Any suggestions or ideas would be greatly appreciated. Thank you, Rudy Quote Link to comment
JorgeB Posted October 20, 2021 Share Posted October 20, 2021 Connect the disk to the onboard SATA controller and check if it's detected in the BIOS. 1 Quote Link to comment
Deznuts05 Posted October 20, 2021 Author Share Posted October 20, 2021 10 hours ago, JorgeB said: Connect the disk to the onboard SATA controller and check if it's detected in the BIOS. Thank you I will give that a try Quote Link to comment
Deznuts05 Posted October 22, 2021 Author Share Posted October 22, 2021 I still haven't had a change to give this a try. I should mention that I am using a Dell H200 6Gbps HBA LSI 9211, to connect my drives but I see what you're saying here. I'll follow up once I'm able to tinker. thanks again! Quote Link to comment
Deznuts05 Posted October 23, 2021 Author Share Posted October 23, 2021 On 10/20/2021 at 3:15 AM, JorgeB said: Connect the disk to the onboard SATA controller and check if it's detected in the BIOS. That was the ticket! Any ideas why the LSI 9211 couldn't detect it? Quote Link to comment
JorgeB Posted October 24, 2021 Share Posted October 24, 2021 It should, pretty sure others have used that same model disk before with one. Quote Link to comment
Deznuts05 Posted October 28, 2021 Author Share Posted October 28, 2021 Thanks JorgeB, just wanted to follow up and say the issue was with the icyDock that I'm using. Works like a charm connected directly to the HBA. Thanks! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.