mostlydave Posted November 11, 2021 Share Posted November 11, 2021 I just replaced a disk in my array and the rebuild appeared to have stopped part of the way through, but the yellow rebuild message on the web interface was gone and none of the commands in Array Operations were working for me so I did a hard reset The server rebooted okay and the new disk looked good and a parity check started last night. The parity check is currently stuck at 70.2 % with the yellow text saying a parity check is running gone again but still showing in in progress in Array operations. System log download is attached. zelda-syslog-20211111-1435.zip Quote Link to comment
JorgeB Posted November 11, 2021 Share Posted November 11, 2021 ATA errors are from the cache device, unrelated to rebuilds, but try replacing the SATA cable. Reiser fs corruption detected, can't see in which disk, so check filesystem on all reiser fs disks, possibly start with the replaced disk. P.S. good idea to convert all reiser disks to xfs P.P.S. next time please post the complete diagnostics. Quote Link to comment
mostlydave Posted November 11, 2021 Author Share Posted November 11, 2021 I'll check that out, The diagnostic link in the getting started post is dead, so I posted what I could find Quote Link to comment
JorgeB Posted November 11, 2021 Share Posted November 11, 2021 8 minutes ago, mostlydave said: The diagnostic link in the getting started post is dead What post is that so I can correct it? Quote Link to comment
mostlydave Posted November 11, 2021 Author Share Posted November 11, 2021 The "Capture your log" link on this page: Need help? Read me first! - General Support - Unraid Quote Link to comment
JorgeB Posted November 11, 2021 Share Posted November 11, 2021 22 minutes ago, mostlydave said: The "Capture your log" link on this page: That post needs updating, but that is only for older releases, without the diags option, just above that: Quote [For Unraid v6.0-rc4 or later] If networking is working, browse to the Unraid webGui, go to the Tools tab, click on the Diagnostics icon, then click on the Download button (Collect button if v6.0). After the diagnostic data collection is complete, it will save a diagnostics zip file to your computer, to the download location you specify or is configured in your browser. This zipped file is ready to attach to a forum post. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.