Btrfs loaded, crc32c=crc32c-generic

[Vanum]

Hello friends and family! 

 

I'm reaching out to you guys because I'm stuck on my latest server. I've been using Unraid for quite some time now and usually I can figure these types of things out, but my Google Fu doesn't appear to be leading me to answer. 

 

I was having issues accessing the Web UI, so I decided to reboot the server through normal means. I restarted the server and attempted to reconnect to the Web UI. No dice. I hard powered off the server and rebooted again. Still no dice. I plugged the server up to a monitor and started looking at verbose logging. Attached is the console log of where it got stuck at. 

 

---

 

Things I've tried:

• I've built a new USB stick and copied over the config file
• I've built a new USB stick with stock stable Unraid
• I've built a new USB stick with 6.10 Unraid 
• I have removed the CMOS battery
  • Attempted to boot with stock settings
  • Attempted to boot with adjusted settings for Unraid
• Used existing BIOS version, F20 and upgraded version, F21a
• I put in a separate USB controller and attempted to boot to Unraid
• I unplugged all other USB devices and left only my mouse and keyboard
• I have removed all sticks of RAM and attempted to boot with each one of them.
• I have removed all HDDs and SSDs and attempted to boot
• Removed both my graphics cards and attempted to just boot with onboard graphics.
• I've attempted to boot to Windows 10 installer (I am able to get to the install screen and browse at what drives I would like to install on)
• I am not able to get into Ubuntu Live CD for some reason. It just freezes at the Gigabyte logo screen
• I am also not able to launch Manjaro Live CD either. Same results. 

---

 

Specs

 

GIGABYTE Z490 Vison G - BIOS Firmware 21a

i9-10900K @ 5.00GHz cooled with a Noctua NH-D15

G.SKILL TridentZ RGB - 24GB @ stock speeds

24 TB Array - Mech storage

500 GB Cache Drive - SSD storage

(2x) 256 GB Unassigned SSDs for VM

3070 RTX

3080 RTX TI 

 

---

 

Thank you all in advanced for this help! I really try not to bug you guys, but I've been at this since 12 PM today and I've spent almost 7 hours with what feels like no progress >_>

[trurl]

Have you tried booting in SAFE mode?

 

memtest?

[Vanum]

Have you tried booting in SAFE mode?
 
memtest?

Yes, I've booted into safe mode with and without GUI. Same results. Gets hung on the same place.

I started memtest, but wasn't quite ready to just let it from for 24 hours like some people online were suggesting.

Sent from my Pixel 3 XL using Tapatalk

[trurl]

One memtest pass will often find a problem if there is one but not always.

[Vanum]

One memtest pass will often find a problem if there is one but not always.

I will run it through a pass now and see if it runs into anything.

Sent from my Pixel 3 XL using Tapatalk

[Vanum]

I ran memtest and got my first pass. I didn't receive any error messages!

Why would it I be able to boot into Windows, but I can't boot into a Linux distro? That struck me as really weird.

Sent from my Pixel 3 XL using Tapatalk

[trurl]

44 minutes ago, Vanum said:

Why would it I be able to boot into Windows, but I can't boot into a Linux distro?

Some BIOS boot setting

[Vanum]

Here are my BIOS Pictures: https://imgur.com/a/iGFoFdE

[trurl]

On the Boot page, can you disable Windows 10 Features?