bronsonmcsmash Posted December 20, 2021 Share Posted December 20, 2021 Hi guys. I'm currently rebuilding a drive from parity. During rebuild my server has started erroring out massively (Read and write errors) . For some reason its seeing my active server drives as unnassigned drives while they are on the server and mounted . Currently my data is all still accessable via emulation. Some of the files can't seem to be copied while this is going on. Quote Link to comment
dlandon Posted December 21, 2021 Share Posted December 21, 2021 3 hours ago, bronsonmcsmash said: Hi guys. I'm currently rebuilding a drive from parity. During rebuild my server has started erroring out massively (Read and write errors) . For some reason its seeing my active server drives as unnassigned drives while they are on the server and mounted . Currently my data is all still accessable via emulation. Some of the files can't seem to be copied while this is going on. Those disks are dropping out of the array and Linux then assigns new device numbers thinking they are new hot plugged disks. UD picks them up because they are not assigned to the array. I think you are wasting you time trying to rebuild the disk. You need to figure out why the disks are dropping off-line. How are the disks connected? What is common between those three disks? Post your diagnostics and one of the drive gurus like @JorgeB can lend a hand. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.