Unassigned Mounted drive outside of array is always read only

jeffreywhunter · January 6, 2022

I have a modest server with this configuration:

1. I5 2500k w/32gb Memory (unRaid 6.9.2 - religiously keep all plugins/docker apps up to date)

2. Internal SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)

3. 2 - Serial Attached SCSI controller: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05)

4. Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)

I have one 2TB HGST drive that I'm trying to mount outside of the array as a scratch drive available via SMB. I'm able to successfully mount the drive (see image of mains), ensuring that Read-Only is set to NO (see image of mount config), when I try to move a file to the drive, I'm getting an error saying the drive is write protected (see image).

The config clearly shows Read Only = No, I must be missing a configuration somewhere.

Thanks in advance!