zacnaiman Posted January 19, 2022 Share Posted January 19, 2022 Hello, i just built my first unraid machine about 1-2 weeks ago and was expriences issues trasnfering data. the only way i was able to transfer all my data was if i did it in portions of under 1TB or else unraid would become irresponsive and crash with the only way of bringing it back being a force shutdown and restart. i thought the problem was exlcusive to trasnfering data as the hours and hours it took to build the array i didnt have a single crash or issue. now that i have installed some dockers and try and get my plex server up and running im experiences these crashes even worse now. once i start the dockers up within a couple mins it just dies like it did before and needs a reboot. this is so frustering and i cannot seem to solve it for the life of me. i would appreciate any help i can get. attached is the syslog and diagnostics. thanks in advance mediaserver-diagnostics-20220119-1338.zip syslog Quote Link to comment
JorgeB Posted January 19, 2022 Share Posted January 19, 2022 Unfortunately I can't see nothing relevant logged before the crashes, this usually points to a hardware issue, start by running memtest and/or try swapping some components if available, like PSU, board RAM, etc. Quote Link to comment
zacnaiman Posted January 19, 2022 Author Share Posted January 19, 2022 i am going to try and run memtest now and see what happens. im hoping its something as simple as maybe a bad ram stick. could it possibly be a faulty USB drive? Quote Link to comment
JorgeB Posted January 19, 2022 Share Posted January 19, 2022 Possible yes, but I would guess unlikely. Quote Link to comment
zacnaiman Posted January 20, 2022 Author Share Posted January 20, 2022 (edited) ive been running mem test for 6 hours now. its on its 3/4 pass and has shown no errors. im ofc going to let it complete but assuming nothing shows up at the end it looks like memory isnt the issue. i would also think that between the system running for hours here and the hours it ran while orignally making the array that its not a hardware issues but you can attest to that better than i can. it leads me to believe that this is some sort of software/settings issue. im not sure what else to try or where to go from here. i dont have an AMD CPU so this shouldnt be a c state issue and between it crashign like this during data trasnfer and now when im trying to start dockers i dont believe this is a VLAN thing but im not sure as i just saw someone on the forums speak about that when they were having issues but tbh im not too familiar with it and i dont wanna start going down that rabbit hole if its just out of the relm of possibility. again any additional help would be greatly appreicated. sorry for a bit of rant just trying to provide as much info as posssible. also lmk if there is some way i can provide you with greater diagnostics or logs. they just seem to not show anything Edited January 20, 2022 by zacnaiman Quote Link to comment
zacnaiman Posted January 21, 2022 Author Share Posted January 21, 2022 (edited) yup the machine passed memtest no issue. not sure where to go from here Edited January 21, 2022 by zacnaiman Quote Link to comment
trurl Posted January 21, 2022 Share Posted January 21, 2022 On 1/19/2022 at 7:50 PM, zacnaiman said: some way i can provide you with greater diagnostics or logs setup syslog server Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.