two of my nine disks have errors.

[Trevo525]

First off, this is not a new install. It's been working without any changes for 2-3 years now. So, that makes me believe that it might be hardware failure. But, I checked the GUI today and saw that two of my disks had a little red 'x' where there is normally a green dot. I see 66 errors under both drives.

 

Following error under the logs of Disk 5 "ata11.00: exception Emask 0x0 SAct 0x10 SErr 0x0 action 0x6 frozen" here is the full log.

Jan 22 12:57:59 TrevNas2 kernel: ata11: SATA max UDMA/133 abar m2048@0xfbabe000 port 0xfbabe200 irq 42
Jan 22 12:57:59 TrevNas2 kernel: ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Jan 22 12:57:59 TrevNas2 kernel: ata11.00: ATA-9: WDC WD80EMAZ-00WJTA0, 7HJTUTUF, 83.H0A83, max UDMA/133
Jan 22 12:57:59 TrevNas2 kernel: ata11.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32), AA
Jan 22 12:57:59 TrevNas2 kernel: ata11.00: configured for UDMA/133
Jan 22 12:57:59 TrevNas2 kernel: sd 11:0:0:0: [sdk] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
Jan 22 12:57:59 TrevNas2 kernel: sd 11:0:0:0: [sdk] 4096-byte physical blocks
Jan 22 12:57:59 TrevNas2 kernel: sd 11:0:0:0: [sdk] Write Protect is off
Jan 22 12:57:59 TrevNas2 kernel: sd 11:0:0:0: [sdk] Mode Sense: 00 3a 00 00
Jan 22 12:57:59 TrevNas2 kernel: sd 11:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 22 12:57:59 TrevNas2 kernel: sdk: sdk1
Jan 22 12:57:59 TrevNas2 kernel: sd 11:0:0:0: [sdk] Attached SCSI removable disk
Jan 22 12:58:36 TrevNas2 emhttpd: WDC_WD80EMAZ-00WJTA0_7HJTUTUF (sdk) 512 15628053168
Jan 22 12:58:36 TrevNas2 kernel: mdcmd (6): import 5 sdk 64 7814026532 0 WDC_WD80EMAZ-00WJTA0_7HJTUTUF
Jan 22 12:58:36 TrevNas2 kernel: md: import disk5: (sdk) WDC_WD80EMAZ-00WJTA0_7HJTUTUF size: 7814026532
Jan 22 12:58:36 TrevNas2 emhttpd: read SMART /dev/sdk
Jan 22 12:58:41 TrevNas2 emhttpd: shcmd (28): echo 128 > /sys/block/sdk/queue/nr_requests
Jan 22 12:58:47 TrevNas2 s3_sleep: included disks=sdb sdc sdd sde sdf sdg sdh sdi sdj sdk sdl
Jan 24 02:15:46 TrevNas2 kernel: ata11.00: exception Emask 0x0 SAct 0x10 SErr 0x0 action 0x6 frozen
Jan 24 02:15:46 TrevNas2 kernel: ata11.00: failed command: READ FPDMA QUEUED
Jan 24 02:15:46 TrevNas2 kernel: ata11.00: cmd 60/08:20:98:6c:ac/00:00:0d:01:00/40 tag 4 ncq dma 4096 in
Jan 24 02:15:46 TrevNas2 kernel: ata11.00: status: { DRDY }
Jan 24 02:15:46 TrevNas2 kernel: ata11: hard resetting link
Jan 24 02:15:56 TrevNas2 kernel: ata11: softreset failed (1st FIS failed)
Jan 24 02:15:56 TrevNas2 kernel: ata11: hard resetting link

 

Disk 6 had no such errors but still didn't show up in this at all.

Jan 22 12:57:59 TrevNas2 kernel: ata12: SATA max UDMA/133 abar m2048@0xfbabe000 port 0xfbabe280 irq 42
Jan 22 12:57:59 TrevNas2 kernel: ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Jan 22 12:57:59 TrevNas2 kernel: ata12.00: ATA-9: WDC WD80EMAZ-00WJTA0, JEGVK2AN, 83.H0A83, max UDMA/133
Jan 22 12:57:59 TrevNas2 kernel: ata12.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32), AA
Jan 22 12:57:59 TrevNas2 kernel: ata12.00: configured for UDMA/133
Jan 22 12:57:59 TrevNas2 kernel: sd 12:0:0:0: [sdl] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
Jan 22 12:57:59 TrevNas2 kernel: sd 12:0:0:0: [sdl] 4096-byte physical blocks
Jan 22 12:57:59 TrevNas2 kernel: sd 12:0:0:0: [sdl] Write Protect is off
Jan 22 12:57:59 TrevNas2 kernel: sd 12:0:0:0: [sdl] Mode Sense: 00 3a 00 00
Jan 22 12:57:59 TrevNas2 kernel: sd 12:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 22 12:57:59 TrevNas2 kernel: sdl: sdl1
Jan 22 12:57:59 TrevNas2 kernel: sd 12:0:0:0: [sdl] Attached SCSI removable disk
Jan 22 12:58:36 TrevNas2 emhttpd: WDC_WD80EMAZ-00WJTA0_JEGVK2AN (sdl) 512 15628053168
Jan 22 12:58:36 TrevNas2 kernel: mdcmd (7): import 6 sdl 64 7814026532 0 WDC_WD80EMAZ-00WJTA0_JEGVK2AN
Jan 22 12:58:36 TrevNas2 kernel: md: import disk6: (sdl) WDC_WD80EMAZ-00WJTA0_JEGVK2AN size: 7814026532
Jan 22 12:58:36 TrevNas2 emhttpd: read SMART /dev/sdl
Jan 22 12:58:41 TrevNas2 emhttpd: shcmd (29): echo 128 > /sys/block/sdl/queue/nr_requests
Jan 22 12:58:47 TrevNas2 s3_sleep: included disks=sdb sdc sdd sde sdf sdg sdh sdi sdj sdk sdl

 

I found this topic on it:

 

But I believe it might be different. Their error seems to be for a bad parity check and mine isn't even able to do a parity check. From my understanding.

 

I also found this one:

But, I'm not sure what to take from it..

I have attached the diagnostics report. I am not sure where to go from here.

trevnas2-diagnostics-20220124-1717.zip

[trurl]

Marvell controllers are NOT recommended but might work if you disable VT-d

 

Disks 5 and 6 are not seen so they must have disconnected, but emulated disks 5 and 6 are mounted so you should be able to rebuild them since you have dual parity. If you can get them to show up.

[Trevo525]

21 minutes ago, trurl said:

Marvell controllers are NOT recommended but might work if you disable VT-d

Do they just go bad more often? Or is there a problem with their drivers? I just wonder because I've been using it for a while with no problems.

 

I found this guide:

 I googled: Asmedia ASM1064 and found https://www.amazon.com/FebSmart-Expansion-System-ASMedia-Controller-FS-S4-Pro/dp/B097R6MQBT Would you suggest this?

 

Thanks for your time! I will try new SATA cables, hopefully tomorrow. But, if that controller seams to be causing the problem, I'll order a new one tonight.