flying_rabbi Posted April 13, 2022 Share Posted April 13, 2022 Hi brains trust! Scenario: Have an 64tb array consisting of 8x8tb hdds. 1x parity, 7 array disks. Lately one of the drives in the array has been failing, and I've been constantly removing it and rebuilding it whilst I swap other variables around eg cables raid cards etc On to the fun bit. I've bit the bullet, and ordered a 14tb drive to replace it, but, owing to the fact that my 14tb drive needs to be the parity, I'm hoping there's a way to shortcut the rebuild time. My idea at the moment is to rebuild my failing drive one last time, and then add the 14tb in as a second parity. Once that's done, remove 8tb parity and drop it in the array. Two full parity checks to complete the operation. Any thoughts on a better way? Had a look on the forums but didn't see my particular scenario. Quote Link to comment
JorgeB Posted April 13, 2022 Share Posted April 13, 2022 You can use the parity swap procedure. Quote Link to comment
flying_rabbi Posted April 13, 2022 Author Share Posted April 13, 2022 @JorgeB thanks mate, didn't look hard enough. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.