Jump to content

[6.10.2] Preclear: Error encountered, please check the log

HDT

By HDT
in General Support

Go to solution Solved by dlandon,

Recommended Posts

HDT Rookie

HDT

Posted
Posted (edited)

I precleared one of my drives that I'm planned to add to my array and it was stopped due to an error.

Can someone please help me understand this error log?

  

Jun 07 07:22:15 preclear_disk_X348T61A_4640: Preclear Disk Version: 1.0.25
Jun 07 07:22:16 preclear_disk_X348T61A_4640: Disk size: 8001563222016
Jun 07 07:22:16 preclear_disk_X348T61A_4640: Disk blocks: 1953506646
Jun 07 07:22:16 preclear_disk_X348T61A_4640: Blocks (512 bytes): 15628053168
Jun 07 07:22:16 preclear_disk_X348T61A_4640: Block size: 4096
Jun 07 07:22:16 preclear_disk_X348T61A_4640: Start sector: 0
Jun 07 07:22:19 preclear_disk_X348T61A_4640: Pre-read: pre-read verification started (1/5) ...
Jun 07 07:33:19 preclear_disk_X348T61A_4640: Pause requested
Jun 07 07:33:19 preclear_disk_X348T61A_4640: Paused
Jun 07 07:35:46 preclear_disk_X348T61A_4640: Resumed
Jun 07 10:18:42 preclear_disk_X348T61A_4640: Pre-Read: progress - 25% read @ 188 MB/s
Jun 07 13:30:15 preclear_disk_X348T61A_4640: Pre-Read: progress - 50% read @ 152 MB/s
Jun 07 17:15:33 preclear_disk_X348T61A_4640: Pre-Read: progress - 75% read @ 130 MB/s
Jun 07 22:12:34 preclear_disk_X348T61A_4640: Pre-Read: elapsed time - 14:47:45
Jun 07 22:12:34 preclear_disk_X348T61A_4640: Pre-read: pre-read verification completed!
Jun 07 22:12:34 preclear_disk_X348T61A_4640: Zeroing: zeroing the disk started (1/5) ...
Jun 07 22:12:34 preclear_disk_X348T61A_4640: Zeroing: emptying the MBR.
Jun 08 01:09:13 preclear_disk_X348T61A_4640: Zeroing: progress - 25% zeroed @ 179 MB/s
Jun 08 04:23:59 preclear_disk_X348T61A_4640: Zeroing: progress - 50% zeroed @ 151 MB/s
Jun 08 08:12:28 preclear_disk_X348T61A_4640: Zeroing: progress - 75% zeroed @ 133 MB/s
Jun 08 13:13:17 preclear_disk_X348T61A_4640: Zeroing: progress - 100% zeroed @ 24 MB/s
Jun 08 13:13:17 preclear_disk_X348T61A_4640: Pause (smartctl run time: 26s)
Jun 08 13:13:17 preclear_disk_X348T61A_4640: /usr/local/emhttp/plugins/unassigned.devices.preclear/scripts/preclear_disk.sh: line 910: kill: (562) - No such process
Jun 08 13:13:18 preclear_disk_X348T61A_4640: Paused
Jun 08 13:13:20 preclear_disk_X348T61A_4640: Zeroing: zeroing the disk completed!
Jun 08 13:13:20 preclear_disk_X348T61A_4640: Signature: writing signature...
Jun 08 13:13:22 preclear_disk_X348T61A_4640: Signature: verifying Unraid's signature on the MBR ...
Jun 08 13:13:22 preclear_disk_X348T61A_4640: Signature: Unraid preclear signature is valid!
Jun 08 13:13:23 preclear_disk_X348T61A_4640: Post-Read: post-read verification started (1/5) ...
Jun 08 13:13:23 preclear_disk_X348T61A_4640: Post-Read: verifying the beginning of the disk.
Jun 08 13:13:24 preclear_disk_X348T61A_4640: Post-Read: verifying the rest of the disk.
Jun 08 16:10:15 preclear_disk_X348T61A_4640: Post-Read: progress - 25% verified @ 180 MB/s
Jun 08 19:24:59 preclear_disk_X348T61A_4640: Post-Read: progress - 50% verified @ 146 MB/s
Jun 08 22:42:13 preclear_disk_X348T61A_4640: Post-Read: elapsed time - 9:28:47
Jun 08 22:42:13 preclear_disk_X348T61A_4640: Post-Read: dd command failed, exit code [1].
Jun 08 22:42:13 preclear_disk_X348T61A_4640: Post-Read: dd output: 2734276+0 records out
Jun 08 22:42:13 preclear_disk_X348T61A_4640: Post-Read: dd output: 5734192381952 bytes (5.7 TB, 5.2 TiB) copied, 34010.8 s, 169 MB/s
Jun 08 22:42:13 preclear_disk_X348T61A_4640: Post-Read: dd output: 2735062+0 records in
Jun 08 22:42:13 preclear_disk_X348T61A_4640: Post-Read: dd output: 2735061+0 records out
Jun 08 22:42:13 preclear_disk_X348T61A_4640: Post-Read: dd output: 5735838646272 bytes (5.7 TB, 5.2 TiB) copied, 34023.6 s, 169 MB/s
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2735840+0 records in
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2735839+0 records out
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 5737470230528 bytes (5.7 TB, 5.2 TiB) copied, 34035.4 s, 169 MB/s
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2736554+0 records in
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2736553+0 records out
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 5738967597056 bytes (5.7 TB, 5.2 TiB) copied, 34047.2 s, 169 MB/s
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2737401+0 records in
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2737400+0 records out
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 5740743884800 bytes (5.7 TB, 5.2 TiB) copied, 34060 s, 169 MB/s
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2738225+0 records in
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2738224+0 records out
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 5742471938048 bytes (5.7 TB, 5.2 TiB) copied, 34072.8 s, 169 MB/s
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2739041+0 records in
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2739040+0 records out
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 5744183214080 bytes (5.7 TB, 5.2 TiB) copied, 34085.7 s, 169 MB/s
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2739798+0 records in
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2739797+0 records out
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 5745770758144 bytes (5.7 TB, 5.2 TiB) copied, 34097.4 s, 169 MB/s
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2739969+0 records in
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2739968+0 records out
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 5746129371136 bytes (5.7 TB, 5.2 TiB) copied, 34115.9 s, 168 MB/s
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: dd: error reading '/dev/sdh': Input/output error
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2739970+1 records in
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 2739970+1 records out
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: dd output: 5746134970368 bytes (5.7 TB, 5.2 TiB) copied, 34124.9 s, 168 MB/s
Jun 08 22:42:14 preclear_disk_X348T61A_4640: Post-Read: post-read verification failed!
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Error:
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.:
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: ATTRIBUTE                  INITIAL    NOW      STATUS
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Reallocated_Sector_Ct      0          0        -
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Power_On_Hours             39425      39464    Up 39
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Runtime_Bad_Block          0          0        -
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: End-to-End_Error           0          0        -
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Reported_Uncorrect         0          3        Up 3
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Airflow_Temperature_Cel    31         34       Up 3      ->Failed in Past<-
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Current_Pending_Sector     0          8        Up 8
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Offline_Uncorrectable      0          8        Up 8
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: UDMA_CRC_Error_Count       0          0        -
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: SMART overall-health self-assessment test result: PASSED
Jun 08 22:42:17 preclear_disk_X348T61A_4640: error encountered, exiting ...

 

To me, it seems like a temperature error, but it went from 31 C to 34 C - is that really a major issue to stop the test?

 

How do I recover from this?  What's the next step?

Edited by HDT
Link to comment
ChatNoir Proficient

ChatNoir

Posted
Posted
12 minutes ago, HDT said:

To me, it seems like a temperature error, but it went from 31 C to 34 C - is that really a major issue to stop the test?

 

How do I recover from this?  What's the next step?

The temperature is not a problem, however other SMART attribues are.

  

Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Reported_Uncorrect         0          3        Up 3
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Current_Pending_Sector     0          8        Up 8
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Offline_Uncorrectable      0          8        Up 8

You can try to run an Extended SMART test on the drive (make sure that spin down it turned OFF for the drive). However, I am not sure that it would clear those.

  • Thanks 1
Link to comment
HDT Rookie

HDT

Posted
  • Author
Posted (edited)
7 hours ago, ChatNoir said:

The temperature is not a problem, however other SMART attribues are.

  

Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Reported_Uncorrect         0          3        Up 3
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Current_Pending_Sector     0          8        Up 8
Jun 08 22:42:16 preclear_disk_X348T61A_4640: S.M.A.R.T.: Offline_Uncorrectable      0          8        Up 8

You can try to run an Extended SMART test on the drive (make sure that spin down it turned OFF for the drive). However, I am not sure that it would clear those.

 

Oh no!  Do you think this drive is bad and I cannot use it?

 

Extended self test failed at 10%

  

smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.43-Unraid] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Archive HDD (SMR)
Device Model:     ST8000AS0002-1NA17Z
Serial Number:    X348T61A
LU WWN Device Id: 5 000c50 0a27f6c8a
Firmware Version: RT18
User Capacity:    8,001,563,222,016 bytes [8.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5980 rpm
Device is:        In smartctl database 7.3/5387
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jun  9 06:35:53 2022 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 121)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 951) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x30b5)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   116   086   006    -    222342091
  3 Spin_Up_Time            PO----   090   090   000    -    0
  4 Start_Stop_Count        -O--CK   089   089   020    -    11421
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  7 Seek_Error_Rate         POSR--   069   060   030    -    64590058685
  9 Power_On_Hours          -O--CK   055   055   000    -    39465
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   097   097   020    -    3430
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   097   097   000    -    3
188 Command_Timeout         -O--CK   100   096   000    -    90195951648
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   070   030   045    Past 30 (255 255 30 25 0)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   001   001   000    -    601050
193 Load_Cycle_Count        -O--CK   001   001   000    -    622279
194 Temperature_Celsius     -O---K   030   070   000    -    30 (0 9 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   119   099   000    -    222342091
197 Current_Pending_Sector  -O--C-   100   100   000    -    8
198 Offline_Uncorrectable   ----C-   100   100   000    -    8
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
240 Head_Flying_Hours       ------   100   253   000    -    12443 (227 29 0)
241 Total_LBAs_Written      ------   100   253   000    -    57249371118
242 Total_LBAs_Read         ------   100   253   000    -    358304724855
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x08       GPL     R/O      8  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      8  Write stream error log
0x22       GPL     R/O      8  Read stream error log
0x24       GPL     R/O    512  Current Device Internal Status Data log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      24  Device vendor specific log
0xa2       GPL     VS    8160  Device vendor specific log
0xa8-0xa9  GPL,SL  VS     136  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    9048  Device vendor specific log
0xbe-0xbf  GPL     VS   65528  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL,SL  VS      16  Device vendor specific log
0xd1       GPL     VS      80  Device vendor specific log
0xd3       GPL     VS    1920  Device vendor specific log
0xda       GPL,SL  VS       8  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 3
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3 [2] occurred at disk power-on lifetime: 39464 hours (1644 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 53 00 00 00 02 9c f0 3a b8 00 00  Error: UNC at LBA = 0x29cf03ab8 = 11222923960

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 02 9c f0 3a b8 40 00  2d+00:45:04.890  READ FPDMA QUEUED
  ef 00 10 00 02 00 00 00 00 00 00 a0 00  2d+00:45:04.889  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 00  2d+00:45:04.889  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 00  2d+00:45:04.888  IDENTIFY DEVICE
  ef 00 03 00 46 00 00 00 00 00 00 a0 00  2d+00:45:04.888  SET FEATURES [Set transfer mode]

Error 2 [1] occurred at disk power-on lifetime: 39464 hours (1644 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 53 00 00 00 02 9c f0 3a b8 00 00  Error: UNC at LBA = 0x29cf03ab8 = 11222923960

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 02 9c f0 3a b8 40 00  2d+00:45:02.105  READ FPDMA QUEUED
  60 00 00 00 08 00 02 9c f0 3a b0 40 00  2d+00:45:02.105  READ FPDMA QUEUED
  60 00 00 00 08 00 02 9c f0 3a a8 40 00  2d+00:45:02.105  READ FPDMA QUEUED
  60 00 00 00 08 00 02 9c f0 3a a0 40 00  2d+00:45:02.105  READ FPDMA QUEUED
  60 00 00 00 08 00 02 9c f0 3a 98 40 00  2d+00:45:02.104  READ FPDMA QUEUED

Error 1 [0] occurred at disk power-on lifetime: 39464 hours (1644 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 53 00 00 00 02 9c f0 3a b8 00 00  Error: UNC at LBA = 0x29cf03ab8 = 11222923960

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 05 40 00 02 9c f0 44 00 40 00  2d+00:44:59.223  READ FPDMA QUEUED
  60 00 00 04 c0 00 02 9c f0 3f 40 40 00  2d+00:44:59.223  READ FPDMA QUEUED
  60 00 00 05 40 00 02 9c f0 3a 00 40 00  2d+00:44:59.223  READ FPDMA QUEUED
  b0 00 d0 00 01 00 00 00 c2 4f 00 00 00  2d+00:44:59.031  SMART READ DATA
  60 00 00 00 c0 00 02 9c f0 39 40 40 00  2d+00:44:58.975  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%     39465         11222923960
# 2  Extended offline    Completed: read failure       90%     39465         11222923960

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
Device State:                        Active (0)
Current Temperature:                    30 Celsius
Power Cycle Min/Max Temperature:     25/30 Celsius
Lifetime    Min/Max Temperature:      9/70 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         3 minutes
Temperature Logging Interval:        59 minutes
Min/Max recommended Temperature:     14/55 Celsius
Min/Max Temperature Limit:           10/60 Celsius
Temperature History Size (Index):    128 (80)

Index    Estimated Time   Temperature Celsius
  81    2022-06-04 01:15    26  *******
  82    2022-06-04 02:14     ?  -
  83    2022-06-04 03:13    25  ******
  84    2022-06-04 04:12     ?  -
  85    2022-06-04 05:11    24  *****
  86    2022-06-04 06:10     ?  -
  87    2022-06-04 07:09    25  ******
  88    2022-06-04 08:08     ?  -
  89    2022-06-04 09:07    24  *****
  90    2022-06-04 10:06     ?  -
  91    2022-06-04 11:05    26  *******
  92    2022-06-04 12:04     ?  -
  93    2022-06-04 13:03    28  *********
  94    2022-06-04 14:02     ?  -
  95    2022-06-04 15:01    29  **********
  96    2022-06-04 16:00     ?  -
  97    2022-06-04 16:59    27  ********
  98    2022-06-04 17:58     ?  -
  99    2022-06-04 18:57    29  **********
 100    2022-06-04 19:56     ?  -
 101    2022-06-04 20:55    29  **********
 102    2022-06-04 21:54     ?  -
 103    2022-06-04 22:53    25  ******
 104    2022-06-04 23:52     ?  -
 105    2022-06-05 00:51    24  *****
 106    2022-06-05 01:50     ?  -
 107    2022-06-05 02:49    26  *******
 108    2022-06-05 03:48     ?  -
 109    2022-06-05 04:47    25  ******
 110    2022-06-05 05:46     ?  -
 111    2022-06-05 06:45    26  *******
 112    2022-06-05 07:44     ?  -
 113    2022-06-05 08:43    29  **********
 114    2022-06-05 09:42     ?  -
 115    2022-06-05 10:41    24  *****
 116    2022-06-05 11:40     ?  -
 117    2022-06-05 12:39    20  *
 118    2022-06-05 13:38     ?  -
 119    2022-06-05 14:37    21  **
 120    2022-06-05 15:36     ?  -
 121    2022-06-05 16:35    26  *******
 122    2022-06-05 17:34     ?  -
 123    2022-06-05 18:33    28  *********
 124    2022-06-05 19:32     ?  -
 125    2022-06-05 20:31    29  **********
 126    2022-06-05 21:30     ?  -
 127    2022-06-05 22:29    30  ***********
   0    2022-06-05 23:28     ?  -
   1    2022-06-06 00:27    27  ********
   2    2022-06-06 01:26     ?  -
   3    2022-06-06 02:25    25  ******
   4    2022-06-06 03:24     ?  -
   5    2022-06-06 04:23    26  *******
   6    2022-06-06 05:22     ?  -
   7    2022-06-06 06:21    27  ********
   8    2022-06-06 07:20     ?  -
   9    2022-06-06 08:19    27  ********
  10    2022-06-06 09:18     ?  -
  11    2022-06-06 10:17    28  *********
  12    2022-06-06 11:16     ?  -
  13    2022-06-06 12:15    25  ******
  14    2022-06-06 13:14     ?  -
  15    2022-06-06 14:13    30  ***********
  16    2022-06-06 15:12     ?  -
  17    2022-06-06 16:11    31  ************
  18    2022-06-06 17:10     ?  -
  19    2022-06-06 18:09    24  *****
  20    2022-06-06 19:08     ?  -
  21    2022-06-06 20:07    26  *******
  22    2022-06-06 21:06     ?  -
  23    2022-06-06 22:05    30  ***********
  24    2022-06-06 23:04     ?  -
  25    2022-06-07 00:03    31  ************
  26    2022-06-07 01:02     ?  -
  27    2022-06-07 02:01    29  **********
  28    2022-06-07 03:00     ?  -
  29    2022-06-07 03:59    31  ************
  30    2022-06-07 04:58    33  **************
  31    2022-06-07 05:57    33  **************
  32    2022-06-07 06:56    32  *************
  33    2022-06-07 07:55    33  **************
  34    2022-06-07 08:54    32  *************
 ...    ..(  2 skipped).    ..  *************
  37    2022-06-07 11:51    32  *************
  38    2022-06-07 12:50    31  ************
  39    2022-06-07 13:49    33  **************
 ...    ..(  4 skipped).    ..  **************
  44    2022-06-07 18:44    33  **************
  45    2022-06-07 19:43    34  ***************
  46    2022-06-07 20:42    34  ***************
  47    2022-06-07 21:41    35  ****************
  48    2022-06-07 22:40    33  **************
  49    2022-06-07 23:39    33  **************
  50    2022-06-08 00:38    35  ****************
  51    2022-06-08 01:37    34  ***************
  52    2022-06-08 02:36    34  ***************
  53    2022-06-08 03:35    33  **************
  54    2022-06-08 04:34    35  ****************
  55    2022-06-08 05:33    35  ****************
  56    2022-06-08 06:32    33  **************
  57    2022-06-08 07:31    34  ***************
  58    2022-06-08 08:30    33  **************
  59    2022-06-08 09:29    33  **************
  60    2022-06-08 10:28    33  **************
  61    2022-06-08 11:27    32  *************
 ...    ..(  2 skipped).    ..  *************
  64    2022-06-08 14:24    32  *************
  65    2022-06-08 15:23    33  **************
 ...    ..(  2 skipped).    ..  **************
  68    2022-06-08 18:20    33  **************
  69    2022-06-08 19:19    34  ***************
  70    2022-06-08 20:18    35  ****************
  71    2022-06-08 21:17    35  ****************
  72    2022-06-08 22:16    35  ****************
  73    2022-06-08 23:15    34  ***************
  74    2022-06-09 00:14    34  ***************
  75    2022-06-09 01:13    34  ***************
  76    2022-06-09 02:12    33  **************
  77    2022-06-09 03:11    34  ***************
  78    2022-06-09 04:10    34  ***************
  79    2022-06-09 05:09     ?  -
  80    2022-06-09 06:08    25  ******

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4            3430  ---  Lifetime Power-On Resets
0x01  0x010  4           39465  ---  Power-on Hours
0x01  0x018  6     57249240798  ---  Logical Sectors Written
0x01  0x020  6        54570980  ---  Number of Write Commands
0x01  0x028  6    358300732244  ---  Logical Sectors Read
0x01  0x030  6       602424975  ---  Number of Read Commands
0x01  0x038  6               -  ---  Date and Time TimeStamp
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4       643119272  N--  Spindle Motor Power-on Hours
0x03  0x010  4       643100623  N--  Head Flying Hours
0x03  0x018  4          622279  ---  Head Load Events
0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
0x03  0x028  4               2  ---  Read Recovery Attempts
0x03  0x030  4               0  ---  Number of Mechanical Start Failures
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4             129  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4              32  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              30  N--  Current Temperature
0x05  0x010  1              33  N--  Average Short Term Temperature
0x05  0x018  1              33  N--  Average Long Term Temperature
0x05  0x020  1              70  N--  Highest Temperature
0x05  0x028  1               9  N--  Lowest Temperature
0x05  0x030  1              68  N--  Highest Average Short Term Temperature
0x05  0x038  1               1  N--  Lowest Average Short Term Temperature
0x05  0x040  1              65  N--  Highest Average Long Term Temperature
0x05  0x048  1               0  N--  Lowest Average Long Term Temperature
0x05  0x050  4           34523  ---  Time in Over-Temperature
0x05  0x058  1              55  ---  Specified Maximum Operating Temperature
0x05  0x060  4               0  ---  Time in Under-Temperature
0x05  0x068  1              13  ---  Specified Minimum Operating Temperature
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            2  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS

 

Edited by HDT
Link to comment
  • Solution
dlandon Veteran

dlandon

Posted
  • Solution
Posted
4 minutes ago, HDT said:

 

Oh no!  Do you think this drive is bad and I cannot use it?

The post read verification failed.  This could be due to bad memory.  You should run a memory test.

 

The SMART report also reports that the drive has overheated in the past.  This may have caused the errors.

 

Run the memory test and fix any issues there.  Then if you really want to use the disk, run another preclear.

 

If you are on Unraid 6.9 or greater, remove the preclear disk plugin and install the UD Preclear plugin.  It's an updated preclear.

  • Thanks 1
Link to comment
Falcosc Apprentice

Falcosc

Posted
Posted

I would say the drive is bad because I beleave that SMART reporting is done on the integrated processor of the HDD PCB and does not run on your main processor. So even if your memory is bad, SMART should not get effected by this.

 

That is an assumption, so correct me if I am wrong and HDD does actually need to OS to cooperate to offload the checksum calculation to the main CPU to compare them with the head read results, which is very unlikely.

 

 

But cool that the preclear actually stops formatting. I thought you have to monitor these values manually.
I did work with broken hard drives and have some experience with them. I would not recommend it, but here are some unreliable tricks to use broken disks:

 

  • Thanks 1
Link to comment
HDT Rookie

HDT

Posted
  • Author
Posted
30 minutes ago, dlandon said:

The post read verification failed.  This could be due to bad memory.  You should run a memory test.

 

The SMART report also reports that the drive has overheated in the past.  This may have caused the errors.

 

Run the memory test and fix any issues there.  Then if you really want to use the disk, run another preclear.

 

If you are on Unraid 6.9 or greater, remove the preclear disk plugin and install the UD Preclear plugin.  It's an updated preclear.

 

Will do!  Thank you sir!

Link to comment
HDT Rookie

HDT

Posted
  • Author
Posted (edited)
35 minutes ago, JorgeB said:

Note that since the extended SMART test failed you still have a disk problem, you can try another full disk write, it might remap the sectors, it won't on a read.

 

Okay, I'm going to retire the drive.

Thanks for all your help, you guys have the BEST SUPPORT in the industry!

Edited by HDT
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Go to topic listing
×
×
  • Create New...