jderby6119 Posted June 17, 2022 Share Posted June 17, 2022 I can figure out why if network interface of the router and server are both 1000Mbps and the transfer is all internal to local network 16 GiB DDR3 (max. installable capacity 32 GiB) Network: bond0: transmit load balancing, mtu 9000 eth0: 1000 Mbps, full duplex, mtu 9000 Kernel: Linux 5.15.46-Unraid x86_64 Quote Link to comment
Frank1940 Posted June 17, 2022 Share Posted June 17, 2022 (edited) What happens when you stop/pause the inbound transfer? Where is that incoming traffic coming from? Are you using a cache drive/array for the inbound traffic? What are you writing to on the Windows computer? You should also attach a diagnostics file while this transfer is going on. Be sure to indicate the approximate time interval when it is happening. Edited June 17, 2022 by Frank1940 Quote Link to comment
jderby6119 Posted June 17, 2022 Author Share Posted June 17, 2022 What happens when you stop/pause the inbound transfer? >>Same thing happen. Start up hits 150Mbs then dips to then goes up again in same pattern during transfer Where is that incoming traffic coming from? >>Its a single 30gb back file from may desktop in my office to sharedrive on unraid server in garage. Both are connected to same router Desktop via wifi and Unraid via ethernet Are you using a cache drive/array for the inbound traffic? >>No Cache drive What are you writing to on the Windows computer? >>Im moving a backup file from my computer to the unraid share drive server You should also attach a diagnostics file while this transfer is going on. Be sure to indicate the approximate time interval when it is happening. thundrshare-diagnostics-20220617-1929.zip Quote Link to comment
Frank1940 Posted June 18, 2022 Share Posted June 18, 2022 2 hours ago, jderby6119 said: Desktop via wifi I am not expert on WiFi transfer speeds. (Especially, bidirectional ones!) But having that in the loop makes analysis very difficult. Quote Link to comment
jderby6119 Posted June 22, 2022 Author Share Posted June 22, 2022 yea unfortunately theres no viable sitatuion where i can get my router and desktop to ethernet without have some wire running across my floor. I get good up/down speeds when im on the internet on my desktop especially when doing downloads but when traferring files in my local network between desktop and unraid box does this weird up and down and gives me nothing near the speeds like when im downloading something off the internet. Quote Link to comment
jderby6119 Posted June 22, 2022 Author Share Posted June 22, 2022 Not sure why but file transfers seem to better after changing a few settings: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.