July 13, 20223 yr Hi, just come back to UNRAID after a long time away. I've got everything set up after copying all my data about to get my drives XFS formatted. Anyway, I've just started doing a parity sync and I'm only getting around 35MB/s. When I was moving all my data (format disk1 to XFS, copy ext4 disk2 to disk1, format disk2 to XFS and so on) I was getting 70-110MB/s. I've searched and it seems these kind of issues always need "diagnostics" which I've attached. Of course I can provide any other info that may be required, one thing that I think may be worth mentioning is that I'm using this SATA card with all of my array drives plugged into it: https://www.amazon.co.uk/gp/product/B09F2KB143/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 My mobo doesn't have a 4x PCIe slot so I've got it in a 16x slot. Thanks in advance to anyone that takes a look homeserver-diagnostics-20220713-0936.zip
July 13, 20223 yr Community Expert Most likely this issue: https://forums.unraid.net/topic/40699-solved-irregular-speed-during-parity-check-sync-or-disk-rebuild/?do=findComment&comment=452618 Also note that the controller you are using has a SATA port multiplier and because of that it's not recommended.
July 13, 20223 yr Author Wow that was a quick response, thanks. Could you confirm my understanding of the thread you linked to? The Samsung drives (which are 10 years old at this point!) don't like AHCI? I've got enough free space to drop those out of the array so might look to drop them out and eventually replace with a new single 4TB drive - if my understanding is correct
July 13, 20223 yr Community Expert Solution 18 minutes ago, smiffy1989 said: The Samsung drives (which are 10 years old at this point!) don't like AHCI? Yep.
July 13, 20223 yr Author Ok, I followed this process to remove them: https://wiki.unraid.net/Manual/Storage_Management#Removing_data_disk.28s.29 It seemed to only increase to around 40MB/s to begin with but now up to about 80MB/s
July 13, 20223 yr 1 hour ago, smiffy1989 said: It seemed to only increase to around 40MB/s to begin with but now up to about 80MB/s And you removed any and all your array drives from off the controller card mentioned? (Because it uses port multipliers which provides slower performance when all drives are in use)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.