Disk Not Showing up

[wesman]

I had an old WD Red drive that I wanted to move the data off of.  Its enclosure has been having issues lately with only periodically showing up on my Windows system. 

 

I removed the drive, added it to a tray and inserted it into my Unraid system. The Blue light came on for a few seconds, but nothing shows up in the Unassigned Devices tab. 

 

ls /dev/sd* doesnt not show another device other than what is in my system. How do I find out what error happened?

 

This is the log After doing a Unassigned Disk Refesh, inserting disks, then Refreshing again

 

Jul 26 10:47:20 Hardhome unassigned.devices: Refreshed Disks and Configuration.
Jul 26 10:56:43 Hardhome kernel: mpt3sas_cm0: log_info(0x31110e05): originator(PL), code(0x11), sub_code(0x0e05)
Jul 26 10:57:04 Hardhome kernel: scsi 9:0:16:0: attempting task abort!scmd(0x00000000d21a4040), outstanding for 22268 ms & timeout 20000 ms
Jul 26 10:57:04 Hardhome kernel: scsi 9:0:16:0: tag#528 CDB: opcode=0x12 12 00 00 00 24 00
Jul 26 10:57:04 Hardhome kernel: scsi target9:0:16: handle(0x0019), sas_address(0x5003048000a56821), phy(33)
Jul 26 10:57:04 Hardhome kernel: scsi target9:0:16: enclosure logical id(0x5003048000a5683f), slot(21) 
Jul 26 10:57:04 Hardhome kernel: scsi target9:0:16: enclosure level(0x0000), connector name(     )
Jul 26 10:57:05 Hardhome kernel: scsi 9:0:16:0: task abort: SUCCESS scmd(0x00000000d21a4040)
Jul 26 10:57:05 Hardhome kernel: end_device-9:0:16: add: handle(0x0019), sas_addr(0x5003048000a56821)
Jul 26 10:57:05 Hardhome kernel: mpt3sas_cm0: mpt3sas_transport_port_remove: removed: sas_addr(0x5003048000a56821)
Jul 26 10:57:05 Hardhome kernel: mpt3sas_cm0: removing handle(0x0019), sas_addr(0x5003048000a56821)
Jul 26 10:57:05 Hardhome kernel: mpt3sas_cm0: enclosure logical id(0x5003048000a5683f), slot(21)
Jul 26 10:57:05 Hardhome kernel: mpt3sas_cm0: enclosure level(0x0000), connector name(     )
Jul 26 10:57:20 Hardhome webGUI: Successful login user root from 192.168.29.122
Jul 26 10:59:49 Hardhome kernel: mpt3sas_cm0: discovery errors(device blocked): sas_address(0x5003048000a56823), handle(0x001a)
Jul 26 10:59:59 Hardhome unassigned.devices: Refreshed Disks and Configuration.

 

hardhome-syslog-20220726-1604.zip

hardhome-diagnostics-20220726-1105.zip

Edited July 26, 2022 by wesman

[JorgeB]

Start by posting the diagnostics.

[wesman]

6 minutes ago, JorgeB said:

Start by posting the diagnostics.

Done, thanks!

[JorgeB]

Looks like a device problem, if possible try connecting it to the onboard Intel SATA controller, errors are easier to read.