Russ3lHD Posted August 3, 2022 Share Posted August 3, 2022 (edited) Hello I just added a new SSD to my cache pool. But now im having the problem of it beeing not writeble. Can someone help me? Tim Edited August 3, 2022 by Russ3lHD Quote Link to comment
Russ3lHD Posted August 3, 2022 Author Share Posted August 3, 2022 diagnostics-20220803-1339.zip Quote Link to comment
JorgeB Posted August 3, 2022 Share Posted August 3, 2022 Please reboot and post new diags after array start. Quote Link to comment
Russ3lHD Posted August 3, 2022 Author Share Posted August 3, 2022 redefined-diagnostics-20220803-1632.zip Quote Link to comment
Solution JorgeB Posted August 3, 2022 Solution Share Posted August 3, 2022 Filesystem is going read-only due to lack of space, but I'm not seeing why it's running out of space at mount time, this usually happens when a balance was started but not signs of "balance resumed" in the log, in any case please try this, with the array stopped type: mkdir /temp mount -o skip_balance /dev/sdf1 /temp btrfs balance cancel /temp umount /temp Then start the array and post new diags. Quote Link to comment
Russ3lHD Posted August 3, 2022 Author Share Posted August 3, 2022 Seems to be working now. Here are the logs. redefined-diagnostics-20220803-1712.zip Quote Link to comment
JorgeB Posted August 3, 2022 Share Posted August 3, 2022 Yes, kooks OK now, note that the pool is in single profile, i.e., no redundancy but you can use the total capacity from both devices, if you want to convert to raid1 (redundant but only 120GB can be used since they have different capacities) you first need to remove some data from cache1. 1 Quote Link to comment
Russ3lHD Posted August 3, 2022 Author Share Posted August 3, 2022 Thank you for your support. Its working again. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.