Saldash Posted August 21, 2022 Share Posted August 21, 2022 Hi all, I've started getting periodic systems halts that require a full hard reset to resolve. The system boots and appears to start normally until I get to entering my array password where after starting the array the UI appears to hang with the unraid logo pulse for a good minute at least before the UI becomes normally responsive again. I run weekly array health checks that have not reported any issues and after a fresh boot up, I cannot see anything in the system log that would indicate the source of the fault (not that I'd know what I was looking at to be honest). I've uploaded the diagnostic file in the hopes that someone might be able to point me in the right direction to getting this sorted. The box isn't highly critical but it is starting to get annoying having to hard reset the box and I've now gotten to the point where it's common enough that the server is on a smart plug that I can remotely turn off/on when this issue crops up. Thanks in advance for your help, tabris-diagnostics-20220821-2044.zip Quote Link to comment
JorgeB Posted August 22, 2022 Share Posted August 22, 2022 Could be this issue: https://forums.unraid.net/bug-reports/prereleases/69x-610x-intel-i915-module-causing-system-hangs-with-no-report-in-syslog-not-alder-lake-r1674/ If you don't need the iGPU driver block it from loading, if it doesn't help enable the syslog server and post that after a crash. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.