Nivin37 Posted September 12, 2022 Share Posted September 12, 2022 Hi, After a six weeks shutdown the Flash Drive failed upon restart and needed to be replaced. During the replacement process one of the data drives was used as the parity drive, I was able to stop it after a few minutes. The array is now back up with the right parity drive, however I now have this one unmounted drive. My question is, have I lost all the data on that drive or can I get it back and if so how. Thanks. Quote Link to comment
trurl Posted September 12, 2022 Share Posted September 12, 2022 You should always have a current backup of flash drive. Even without that there was no need to get into this situation if you had asked for help first. Attach diagnostics to your NEXT post in this thread. Quote Link to comment
Nivin37 Posted September 13, 2022 Author Share Posted September 13, 2022 No current backup. File attached. blacktower-diagnostics-20220913-0926.zip Quote Link to comment
trurl Posted September 13, 2022 Share Posted September 13, 2022 2 hours ago, Nivin37 said: array is now back up with the right parity drive Did you rebuild parity on that drive? Quote Link to comment
Nivin37 Posted September 13, 2022 Author Share Posted September 13, 2022 No, I told it parity was valid. Quote Link to comment
trurl Posted September 13, 2022 Share Posted September 13, 2022 Do you have a spare disk you can use to rebuild disk5? Quote Link to comment
Nivin37 Posted September 13, 2022 Author Share Posted September 13, 2022 No spare drives available. Quote Link to comment
JorgeB Posted September 13, 2022 Share Posted September 13, 2022 Unassign disk5 and start the array, then post new diags, leave actual disk5 untouched for now. Quote Link to comment
trurl Posted September 13, 2022 Share Posted September 13, 2022 12 hours ago, Nivin37 said: the right parity drive How do you know which is the right parity drive? Go to Settings and disable Docker and VM Manager. Don't use your server for anything until we try to recover from this. 3 hours ago, JorgeB said: Unassign disk5 and start the array, then post new diags, leave actual disk5 untouched for now. Then don't do anything else without further advice. Quote Link to comment
Nivin37 Posted September 13, 2022 Author Share Posted September 13, 2022 Docker & VM managers both disabled. I know which drive is parity drive as it is only 6TB drive and I do have some documentation saved to my Jekyll Doc server. New Diag file attached. Thanks... blacktower-diagnostics-20220914-0923.zip Quote Link to comment
trurl Posted September 13, 2022 Share Posted September 13, 2022 Doesn't look like you unassigned disk5. Stop the array, then 15 hours ago, JorgeB said: Unassign disk5 and start the array, then post new diags Quote Link to comment
Nivin37 Posted September 13, 2022 Author Share Posted September 13, 2022 Sorry, missed that, here is the new Diag... blacktower-diagnostics-20220914-0941.zip Quote Link to comment
trurl Posted September 13, 2022 Share Posted September 13, 2022 Post a screenshot of Main - Array Devices, be sure to include the full width Quote Link to comment
Nivin37 Posted September 14, 2022 Author Share Posted September 14, 2022 Full main page... Quote Link to comment
Solution trurl Posted September 14, 2022 Solution Share Posted September 14, 2022 As you can see, emulated disk5 is mounted and has 531G contents. You can examine those emulated contents if you want. They are exactly what would be rebuilt. To rebuild, stop array assign disk5, start array to begin rebuild. Quote Link to comment
Nivin37 Posted September 14, 2022 Author Share Posted September 14, 2022 Data-Rebuild in progress, I'll post the results once finished. I gain more knowledge about unRAID with each issue. trurl, thanks for your time and help...:) Quote Link to comment
Nivin37 Posted September 27, 2022 Author Share Posted September 27, 2022 Data rebuild was successful and there looks to be no ongoing issues with this little event. I did workout why I did not have an up to date backup of the Flash Drive, as I always thought I was good with keeping up with backups. I had taken a backup of the Flash Drive using the GUI some time ago and this was what I ended up using. However after this was done along came the My Server app and I started using it to perform Flash Drive backups instead of using the GUI. This in its self is not an issue, but how they were saved is the issue. I use a MBP and have Safari to expand any zip file I download, so what do I get when I perform a Flash Drive backup from the My Server page, I get a folder not a zip file. At the time I did not notice the difference and just archived the folder, but when it came time to rebuild the Flash Drive I was unable to rebuild using the folder. I did try to zip up the folder and use it to rebuild but that failed and I just moved on thinking I was doing somthing wrong with the backup process. So I have changed Safari so it will not unzip any file I download, thinking about it this is also more secure way of handling files as well. I was just lazy and wanted the brouser to do the work for me...:) Again thanks for the support... 1 Quote Link to comment
trurl Posted September 27, 2022 Share Posted September 27, 2022 8 hours ago, Nivin37 said: unzip any file I download Does it not save the zip file somewhere before it opens it? Have you looked for the zip in the folder where downloads usually go? This has been an ongoing issue when I ask for diagnostics because new users will often try to attach every separate file in the unzipped diagnostics zip file, which nobody wants, and I have to delete all those separate attachments and get them to try again. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.