Boot Stalled after selecting unRaid (No GUI), issue continued after changing USB drive

[Mr.N3rd]

This is the position it stalls at this position in the photo attached:
https://i.postimg.cc/bYM0pH0K/3-DD31167-CC0-B-4-C7-A-83-C4-1-A4-D9-F59860-A.jpg

 

 

The current build is:

Gigabyte GA-7TESM 

144G DDR3 ECC
2x Xeon x5670

Here is the thing, I have noticed that it keeps changing values of installed RAM. It never shows the 144 anymore, currently it is showing 124G, sometimes it shows 96G. I have turned off ECC and ram MemTest 86+ for two days. During that time it was only showing 124G. 

Originally I thought it was related to unRaid but I am more so thinking that its now hardware. I just don't know what the position in boot is point to a MOBO failure, RAM failure, or CPU failure. I'm kind of at a loss at the moment. The Server is down and will not come back up like it is. 

I assume its related to the CPU0 because it stalls on the Spectre vulnerability check on CPU0. I have reinstalled on three USB's trying to see if it was a USB failure. 

Any help would be appreciated 

3DD31167-CC0B-4C7A-83C4-1A4D9F59860A.heic

Edited September 22, 2022 by Mr.N3rd

[JorgeB]

Remove all RAM from CPU0 and use half that RAM on the other CPU for that one, if it boots start adding the removed DIMMs.