September 22, 20223 yr I bought an HP D2600 Disk Shelf to add to pair with my R710 Server. I also bought LSI 9200-8e 6Gbps 8-lane external SAS HBA P20 IT Mode. When adding it to the Server I can add all twelve of the new 2tb drives into the array but after the clearing the disk is complete it tells me 12 disks with read errors and I can't use the twelve new drives. Can anyone help me solve my issue?
September 22, 20223 yr Community Expert 1 hour ago, H3xburn3r said: add all twelve of the new 2tb drives Why are you trying to use so many small disks?
September 22, 20223 yr Author They came with the Disk Shelf. Eventually I will replace them with larger capacity drives over time.
September 22, 20223 yr Community Expert You aren't trying to use hotswap are you? You might try reseating controllers.
September 22, 20223 yr Author I am not using hotswap. I did reseat the controller and rebooted the server a couple times and still the same issue.
September 23, 20223 yr Community Expert Looks like the HBA is losing connection with all the disks at the same time, I would suspect an issue with the enclosure, could also be the HBA>enclosure cable, try adding adding one disk.
September 23, 20223 yr Author I'll try reseating the card again and adding one disk tonight and get back to you.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.