ramair02 Posted September 28, 2022 Share Posted September 28, 2022 (edited) Please help. I had a drive failure the other day, put in a new drive, but that new drive is bad. I'm waiting for a replacement drive to be delivered. I had an extra 4 TB drive that I figured I'd add to the array for now. Added it in a new slot (disk 11, not disk 6 which was the drive failure). It cleared fine, but said unmountable: missing file system. So I removed that drive from the array and formatted it to xfs in unassigned devices then added it back to the array. It kicked off a data rebuild and that drive is still unmountable. I'm not sure what the data rebuild is for, but I don't want to stop the array while that's running. Now I'm seeing errors across multiple drives and I fear I may lose data. I have no idea what's going on. Would appreciate your insight. Thank you. homegrown-diagnostics-20220927-2205.zip Edited September 28, 2022 by ramair02 Quote Link to comment
JorgeB Posted September 28, 2022 Share Posted September 28, 2022 6 hours ago, ramair02 said: It cleared fine, but said unmountable: missing file system. After a disk is cleared it needs to be formatted, formatting must be done inside the array. 6 hours ago, ramair02 said: It kicked off a data rebuild and that drive is still unmountable. That expected since according to parity drive was not formatted, click the format button below the stop array button. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.