fespinoza831 Posted October 10, 2022 Share Posted October 10, 2022 Hello, every other day or so some of my containers will stop working because my cause drive isset as a read only file system. However when this happens. I reboot the server and everything is back to normal. Not quite sure what is going on here. Bad drive? Can someone point me in the right direction. plexserver-diagnostics-20221010-1351.zip Quote Link to comment
Solution JorgeB Posted October 11, 2022 Solution Share Posted October 11, 2022 Pool is a mess, these errors suggests both devices dropped offline in the past: Oct 10 13:27:34 PlexServer kernel: BTRFS info (device sde1): bdev /dev/sde1 errs: wr 23018629, rd 43586, flush 92116, corrupt 2684790, gen 0 Oct 10 13:27:34 PlexServer kernel: BTRFS info (device sde1): bdev /dev/sdf1 errs: wr 59247801, rd 1252542, flush 618630, corrupt 14809834, gen 0 Run a correcting scrub to see if it still can be corrected, then post the output. Quote Link to comment
fespinoza831 Posted October 11, 2022 Author Share Posted October 11, 2022 Thanks for the reply, I tried running the correcting scrub on the cache drive but it doesn't seem to do anything. When i click on apply the screen just flash but nothing happens. Not sure if I'm doing this incorrectly. Oh and by the way the issue with the ready only filesystem happened again this morning. Attached it the diagnostics from this morning. plexserver-diagnostics-20221011-0642.zip Quote Link to comment
JorgeB Posted October 11, 2022 Share Posted October 11, 2022 Both cache devices dropped offline again, check/replace cables and post new diags after array start. Quote Link to comment
fespinoza831 Posted October 12, 2022 Author Share Posted October 12, 2022 I checked cables and made sure they were seated properly. After booting back up, I was able to run the correcting scrub and here is the output and new diags. plexserver-diagnostics-20221011-1956.zip Quote Link to comment
JorgeB Posted October 12, 2022 Share Posted October 12, 2022 Looks good for now, see here for better pool motioning so you're notified if a device drops offline. Quote Link to comment
fespinoza831 Posted October 12, 2022 Author Share Posted October 12, 2022 Great thank you for all the help. What causes this corruption. Anything I did wrong or could have done to prevent it? Quote Link to comment
JorgeB Posted October 12, 2022 Share Posted October 12, 2022 The main issue was the devices dropping offline. Quote Link to comment
fespinoza831 Posted October 12, 2022 Author Share Posted October 12, 2022 It just happened again. plexserver-diagnostics-20221012-1444.zip Quote Link to comment
JorgeB Posted October 12, 2022 Share Posted October 12, 2022 Oct 12 01:48:17 PlexServer kernel: ata6: limiting SATA link speed to 3.0 Gbps Oct 12 01:48:22 PlexServer kernel: ata6: COMRESET failed (errno=-16) Oct 12 01:48:22 PlexServer kernel: ata6: reset failed, giving up Oct 12 01:48:22 PlexServer kernel: ata6.00: disable device One of the cache devices dropped offline again, did you check/replace cables? Both power and SATA. Quote Link to comment
fespinoza831 Posted October 28, 2022 Author Share Posted October 28, 2022 Finally got the sata cables replace two days ago but it happened again. plexserver-diagnostics-20221028-1644.zip Quote Link to comment
JorgeB Posted October 29, 2022 Share Posted October 29, 2022 It dropped again, try using a different port/controller, if it keeps happening it could be the device. Quote Link to comment
fespinoza831 Posted October 30, 2022 Author Share Posted October 30, 2022 Yeah I figured, thank you very much for all the support. I'll let you know how it turns out. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.