(SOLVED) Cant setup Unraid BIOS settings on Asrock motherboard

[iweputo]

Hi,

 

First time trying to install Unraid on a DIY NAS. My NAS build:

• Fractal Design 804 case
• 1 x 10tb HDD Iron Wolf 
• 3 x 2.5 1tb HDD
• Asrock Mobo H310CM-DVS Micro ATX Updated to p4.30 Asrock
• Intel i3 9100f
• Nvidia Quadro p400 GPU
• 8 gb 2666mhz Kingston RAM

 

I create an unraid installation usb with a Sandisk USB, its detected in asrock BIOS i try to search the settings i have to enable like intel virtual thing, CMS but i cant seem to find IOMMU setting and pc just reboots and reboots, i cant escape the reboot cycle. I 

Edited November 16, 2022 by iweputo

[JorgeB]

Do you mean it reboots during booting Unraid? If yes try booting CSM or UEFI, and normal and with the GUI mode, sometimes it makes a difference.

[iweputo]

I managed to solve this with help from the unraid discord, the problem was i had CSM enabled and was trying to legacy boot it. I disabled CSM, went to UEFI only and tried many USBs until my oldest usb 2.0 from lexmark worked and booted automatically, no problems so far. But still i want the most durable USB as the bootable device for my unraid, so im currently searching that topic.