yob42 Posted November 19, 2022 Share Posted November 19, 2022 (edited) Hello, I am needing some help figuring out what is going on. first, all my drives are less than 2 years old. I had 16tb on the array and a parity disk. About 30 days ago one of my 4tb disks had 1 error, then within a few hours it had hundreds. I did not have a disk to replace it so I moved off as much data as I could using unbalanced. then on next reboot the drive was not detectable. (the disk was faulty and no longer would stay spinning up) I started a new config without the disk. now 2 weeks later an error on my other 4tb drive. i pulled all the data from the drive. This drive was still detected and from the smart diagnostics it seems fine. i decided I could preclear the drive and add it again. None of the data i hold is critical and i have a good parity. Now when I try to turn docker services off, vm's, reboot, or shutdown nothing happens. I tried using terminal in the webgui and get no response. I hope there is something in the logs that can help because this is over my head. Edited November 19, 2022 by yob42 Quote Link to comment
JorgeB Posted November 20, 2022 Share Posted November 20, 2022 Please post the diagnostics. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.