sloob Posted November 25, 2022 Share Posted November 25, 2022 I've been plagued with random disk write errors for a while now (I've tried changing everything from the SAS controller, ram, cpu, mobo, psu, sata cables, power cables etc but nothing will fix it, it seems to occur whenever i'm writing heavily to a particular drive) and now it happened while I was rebuilding a disk after a disk upgrade. I don't know if the data rebuild failed when the drive failure occured since it happened during the night but it's been stuck at 58.9% for about 12 hours now. Wondering what the proper procedure is since I now technically have 2 failed drives and can't afford to mess anything up. PS. if the unimaginable happens and another drive fails while I'm rebuilding, is it possible to put the old one back (even tho it's 2TB instead of the new 4TB) and make unraid "trust" it and not loose the files that are on it? Thank you. unraid-diagnostics-20221124-1947.zip Quote Link to comment
JorgeB Posted November 25, 2022 Share Posted November 25, 2022 Doesn't look like a disk problem, reboot and post new diags after array start. Quote Link to comment
sloob Posted November 25, 2022 Author Share Posted November 25, 2022 3 hours ago, JorgeB said: Doesn't look like a disk problem, reboot and post new diags after array start. Ok so I rebooted and it's now saying the drive is normal and the dot is green. maybe it was a GUI issue only? About the random write error, do you have any idea what can cause this other than motherboard,ram,cpu,psu,cables,disks,sas card? I'm starting to suspect my server backplane might be faulty. Thank you unraid-diagnostics-20221125-0730.zip Quote Link to comment
JorgeB Posted November 25, 2022 Share Posted November 25, 2022 17 minutes ago, sloob said: I'm starting to suspect my server backplane might be faulty. It's a strong possibility. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.