December 11, 20223 yr Hi Community, Hopefully someone can help debug my unraid instance. Two weeks ago, I had a parity drive failure, I've replaced the failed drive, everything seemed to be ok. Then decided to replace an old 256GB NVME that was in the raid array. Since then I've had some issues with failing drives. My error message seems to allway produce the constant message of "[sdk] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=DRIVER_OK unraid" While this has only appeared on the one drive, it has been on a second previously "Disk3", but that seems to be fine today. I have a spare drive in the array to replace, but what to ensure it's actual drive failures before replacing then seeking RMA. I've uploaded my diagnostics too, if anyone can help it will be appreciated. Thanks! tower-diagnostics-20221211-1224.zip
December 11, 20223 yr Community Expert Disk looks fine, first thing to try is to update the LSI firmware to latest.
December 12, 20223 yr Author Hmm, I think there is an issue with my HBA card. Going on that line of thinking, replacing a HBA card with a different one... is that straight forward or does that have consequences with unraid? Any guidance will be welcomed!
December 12, 20223 yr Community Expert 1 minute ago, szarekh said: Hmm, I think there is an issue with my HBA card. Going on that line of thinking, replacing a HBA card with a different one... is that straight forward or does that have consequences with unraid? Any guidance will be welcomed! As long as both HBA cards pass through the serial numbers of the drives correctly then Unraid will not care that you swapped them.
December 12, 20223 yr Author Solution Awesome, Well I'll try that first and will let everyone know what happens to my issue. Thanks!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.