February 23, 20233 yr Community Expert Controller still has two ports in IDE mode, I though you've changed that already? 00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (rev 40) Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 IDE Controller [1458:5002] Kernel driver in use: pata_atiixp Kernel modules: pata_atiixp
February 23, 20233 yr Author 12 minutes ago, JorgeB said: Controller still has two ports in IDE mode, I though you've changed that already? 00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (rev 40) Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 IDE Controller [1458:5002] Kernel driver in use: pata_atiixp Kernel modules: pata_atiixp Yeah I 100% did that. I will check again. Wonder if the Motherboard Battery isn't holding bios settings (would explain that!) If that's the issue im going to crack my head against a wall! I'll check it over now and report back.
February 24, 20233 yr Author Solution Wooohooo! Data-Rebuild 2023-02-24, 13:20:17 (Friday) 8 TB 17 hr, 44 min, 15 sec 125.3 MB/s OK 0 All back up and running perfecrtly. The Motherboard did indeed have a dead battery. Switched it, reset the bios back to use ports 5 and 6 as SATA and not IDE as you mentioned, the drive formatted perfectly and 18 hours later, I've fully rebuilt. Thank you JorgeB. I appreciate you and the other mods. So glad that'sorted! **Phew!** 😅 Edited February 24, 20233 yr by cunni
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.