March 22, 20233 yr I recently repurposed a Qnap Nas TS-451+ to unraid. It has 4 x 8TB drives. The parity drive and one of the array drives shows a thumbs down on the dashboard. The drives are Ironwolf NAS drives. I have completed a short and extended self test (says passed with no errors). I am in the last hours or a data migration to the unraid server of approximately 10 TB of media from my main media server (this will be a backup). I have attached the smart report download for the parity drive labeled 451Parity and Disk 2 so also labeled. I have limited experience with bad drives so far but it may be that they are all going bad at once <grin> Thanks in advance for any help received. 451Parity-20230322-1231.zip 451Disk_2_20230322-1234.zip
March 22, 20233 yr Community Expert Attach your diagnostics file to your next post (Do not edit your first post to include it!!!) Also google unraid.net ironwolf issues (Not sure if you might have this problem but be aware of it.) I am also going to ping @JorgeB
March 22, 20233 yr Author I am really just trying to find out if I need to replace these now or can I take a little time to do it. Thanks again
March 22, 20233 yr Community Expert Solution The parity drive shows quite a lot of reallocated sectors so is a bit suspect. Which was the other drive that had a thumbs down? You can acknowledge the SMART error by clicking on the icon and then Unraid will only tell you again about if it changes.
March 23, 20233 yr Community Expert Disk2 also show some issues, but they are not recent so should be OK for now, also note that most have been hotter than desirable in the past.
March 26, 20233 yr Author Thanks. I am using a pc case that had tons of drive bays but guess I need to add some fans to lower the temp. The ambient temp is doing me no favors also. Love the Ukrainian Flag as we hosted a Ukrainian family for several months until they got settled in the US thanks again
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.