coldviber Posted March 23, 2023 Share Posted March 23, 2023 Hello, i'm having a strange behaviour since some time. Randomly i have a error system is readonly (input output error on a disk) this affects the VMs shares. What I try 1- replace the sata cables 2- replace the ssd (i have a mx500 new at the moment) 3- update unraid At the moment i have no ideia whats is going on so any help is appreciated (diagnostics in attach) jplb-diagnostics-20230323-1256.zip Quote Link to comment
JorgeB Posted March 23, 2023 Share Posted March 23, 2023 The VMs pool device dropped offline: Mar 23 05:52:12 JPLB kernel: ata6: hard resetting link Mar 23 05:52:17 JPLB kernel: ata6: found unknown device (class 0) Mar 23 05:52:18 JPLB kernel: ata6: softreset failed (device not ready) Mar 23 05:52:18 JPLB kernel: ata6: reset failed, giving up Mar 23 05:52:18 JPLB kernel: ata6.00: disable device Mar 23 05:52:18 JPLB kernel: ata6: EH complete Mar 23 05:52:18 JPLB kernel: sd 6:0:0:0: [sde] tag#6 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=DRIVER_OK cmd_age=90s Mar 23 05:52:18 JPLB kernel: sd 6:0:0:0: [sde] tag#6 CDB: opcode=0x93 93 08 00 00 00 00 1b b7 22 90 00 00 03 08 00 00 This is usually a power/connection problem, If you have already replaced the SATA cable replace the power cable. Quote Link to comment
coldviber Posted March 23, 2023 Author Share Posted March 23, 2023 (edited) I will try that ty. Is possible also something wrong with the sata controller on the board? Edited March 23, 2023 by coldviber Quote Link to comment
JorgeB Posted March 23, 2023 Share Posted March 23, 2023 Possible, you can swap ports with another device to confirm. Quote Link to comment
coldviber Posted March 23, 2023 Author Share Posted March 23, 2023 @JorgeBI change ports on the board, power cable still happening... any ideia? Quote Link to comment
Solution JorgeB Posted March 24, 2023 Solution Share Posted March 24, 2023 Replace the device. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.