coldviber

But I will check all of my scripts

@JorgeB it should be from the mergefs I used for plex, but I don't remember to have the logs on the past... https://github.com/BinsonBuzz/unraid_rclone_mount

Just to explain a bit the flow: Server starts getting the RAM full, like 70 ish %, 1 VM crash them the other and the flash errors

@JorgeB I added the diagnostics jplb-diagnostics-20230721-0858.zip

just me or a lot of ram use in this last version?

Sorry, I didn't download but the errors was the same, fail to register the flash drive and memory allocation error. I will download in a couple days since the error is like every 2 days or so

@JorgeBsame issue, new USB from samsung (MUF-256BE4/APC), I don't have any usb 2.0 on my board and is already a board with some years. I didn't had this issue on unraid 6.11 and on first releases from unraid 6.12 (rc). any other ideias?

ok I will test it

Hello, I'm on unraid 6.12.1 and I starting having this error Unregistered - flash device error (ENOFLASH7) Also I'm my vm's are stoping randomly any help will be appreciated jplb-diagnostics-20230628-1017.zip

I having the same issues, RAM usage at 70% and vms are being terminated, UI unresponsive

@JorgeBI change ports on the board, power cable still happening... any ideia?

I will try that ty. Is possible also something wrong with the sata controller on the board?

Hello, i'm having a strange behaviour since some time. Randomly i have a error system is readonly (input output error on a disk) this affects the VMs shares. What I try 1- replace the sata cables 2- replace the ssd (i have a mx500 new at the moment) 3- update unraid At the moment i have no ideia whats is going on so any help is appreciated (diagnostics in attach) jplb-diagnostics-20230323-1256.zip

thanks for the quick fix, but I don't think logs are working, at least on my side I don't have any logs from the scripts.

I think the chipset isn't the problem. because the board that i had problems is a x470. Now I'm using a b450

hey, i had this one asus prime x470, and i change to this one asus ROG strix b450-f. My advice is if you are gona buy a new board choose other brand like msi, asrock or gigabyte. Lately i had lots of problems with asus, is in board, routers, phones etc...

Hey, its fix. It was the asus prime board and the OC on the gpu (rx5700) was causing the sistem to crash. thanks

Is from the VM of hiveos. I start the VM 5minutes later erros in array. I thinks is because of the sata option in the vm hardrive. But if some expert from unraid can confirme.

Now i have the vm disable. I'm testing see if the erros shows again

Is possible this problem is cause by a VM with hiveos this configs?

I change the board for a asus ROG b450. After 26 minutes disk error. Logs go in attach The board is updated Set Global C-state control to disabled Set Power Supply Idle Control to Typical Current Idle Replaced sata cables again.... I don't know what to do. jplb-diagnostics-20210212-1646.zip

So the solution will be change the board, i have one ROG, i will try see it helps.

I already did. Last version (5837) from asus. nor 5 minutes disk error.

Hello, I'm trying to set up a new Unraid server, and I'm having a LOT of trouble getting it to run on the AMD platform. I tried all of these suggested fixed I could find: Adding 'rcu_nocbs=0-11' in syslinux config Set Global C-state control to disabled Set Power Supply Idle Control to Typical Current Idle Update BIOS to latest version Replace sata cables Replace powersupply None of those helped. I have a asus prime x470, Ryzen 3700x Am I missing something? I realy need help jplb-diagnostics-20210212-1125.zip