maddox-nola Posted March 25, 2023 Share Posted March 25, 2023 Hello guys, I was trying to upgrade my Unraid server and I think I messed up something. Here is what I was trying to do. I have 4 - 4TB drives one was Parity. and the system was fine. I was going to to try and install a 1 TB Party 2 drive and the motherboard had all the ATA hard disk filled up. So I installed a PCI 2 Port Sata card into the motherboard and the server noticed the new hard disk, but one of my data drives came up missing. So I took the PCI card back out the machine and removed the new hard disk I just installed. I put everything back as it was and rebooted the machine. This time two of my data drives is missing disk 2 and no device and disk 3 has no device. Both have a red "x" next to where the drive should be listed. I didn't swap any data cables around. Do you think the drives stop working? Any advice? IMG_4281.HEIC Quote Link to comment
maddox-nola Posted March 25, 2023 Author Share Posted March 25, 2023 I just rebooted and disk #3 came back on line, I just now have disk #2 has no device. Strange. Quote Link to comment
maddox-nola Posted March 25, 2023 Author Share Posted March 25, 2023 I found the power cable was not correctly and fix that, I now have a "x" on disk 2 and has the original name. Does this mean that the drive crashed? Quote Link to comment
Tindog Posted March 26, 2023 Share Posted March 26, 2023 So this is just an idea, not saying this is correct so don't take my advice to heart, but some motherboards share pcie and ATA slots, and if you try to install something on to both of them, they can cause this issue, try looking up your motherboard, or try changing the slot the pci card is in. Again, I'm not an expert in this, but I had something like this happen before and that is what caused it. Just trying to help. Quote Link to comment
maddox-nola Posted March 26, 2023 Author Share Posted March 26, 2023 Thank you, I will try that option. I think it had only one PCI slot. Quote Link to comment
JorgeB Posted March 26, 2023 Share Posted March 26, 2023 Please post the diagnostics. Quote Link to comment
maddox-nola Posted March 28, 2023 Author Share Posted March 28, 2023 (edited) Hey Guys, My disk 2 did fail, it started making a noise like clicking hard. This drive was less then a year old. I ended up pulling out the drive and replacing it and rebuild the files and everything cleared up. All the drives are now up and running. Edited March 28, 2023 by maddox-nola Quote Link to comment
JorgeB Posted March 28, 2023 Share Posted March 28, 2023 13 minutes ago, maddox-nola said: All the drives are now up and running. I have included the diagnostics. I am not sure how to read the info or what to look for. What is the current problem? Quote Link to comment
maddox-nola Posted March 28, 2023 Author Share Posted March 28, 2023 I don't have any more problems. Thank you. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.