Neejrow Posted June 23, 2023 Share Posted June 23, 2023 Unraid Version: 6.11.5 Motherboard: MSI B550 Mortar Wifi CPU: AMD Ryzen 3900X MEMORY: 32GB @ 3000mhz (mismatched kits of 2x8) Hello, I noticed this morning some errors were listed when my parity drive span up at 5:00am to run MOVER. Also, then recieved two follow up emails with; Subject: Warning [TOWER] - reallocated sector ct is 216 Description: ST8000VN004-2M2101_WKD0TW3W (sdc) Subject: Warning [TOWER] - reported uncorrect is 2 Description: ST8000VN004-2M2101_WKD0TW3W (sdc) I have had errors on drives before and taken certain measures to fix the issue (replace cables etc) or replace the drive itself, but I have never had any errors show up on the parity drive. So I am wondering if I need to do anything differently in this situation? Also just as a side note, is my spin-down delay of 1 hour on my drives too low? They don't get access too often maybe once or twice a day. I do not want to run the drives 24/7 due to the increased noise and electricity costs. I have uploaded the diagnostics to this post and will await for further instruction, thank you. tower-diagnostics-20230623-1623.zip Quote Link to comment
Solution JorgeB Posted June 23, 2023 Solution Share Posted June 23, 2023 Run an extended SMART test on party, but should be OK for now. 1 Quote Link to comment
Neejrow Posted June 24, 2023 Author Share Posted June 24, 2023 So there was a power outage last night while I let the full SMART extended self test run. So my unraid server was shutdown via the UPS. So I will have to do another test. Will update once it's done. Quote Link to comment
Neejrow Posted June 24, 2023 Author Share Posted June 24, 2023 tower-diagnostics-20230625-0200.ziptower-smart-20230625-0159.zip Finally finished the SMART extended self test. Looks fine I guess? On 6/23/2023 at 5:46 PM, JorgeB said: Run an extended SMART test on party, but should be OK for now. Quote Link to comment
JorgeB Posted June 25, 2023 Share Posted June 25, 2023 17 hours ago, Neejrow said: Looks fine I guess? 👍 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.