switch to new system no ethernet connection

[nowinowi]

hello i recently switched from my power hungry amd system to an low power intel system since i never used the power.
now here comes the problem :

when i plug in the unraid usb in the new server and try to turn it on it always gives me "device eth0 does not exist unraid" and i get no connection. when i plug the usb back to the old system it works just fine. i asume it has something todo with the network card and found out that i have a i219v nic on a msi pro h610m b mainboard.

i searched the forum and found that some people had issues when they switched from version 6.9. to 6.10+. my system already runs on 6.12.1. and i can only backup to 6.11.5 as far as i understood.
i really don't know what todo i also attached the diagnostics file. i hope i did it right. 

thanks for you help 😃

nowix-diagnostics-20230629-2049.zip

[JorgeB]

Jun 29 20:45:20 Nowix kernel: e1000e 0000:00:1f.6: The NVM Checksum Is Not Valid
Jun 29 20:45:20 Nowix kernel: e1000e: probe of 0000:00:1f.6 failed with error -5

 

NIC driver is failing to load because of an NVM checksum error, look for a BIOS update, if that doesn't help you will likely need to use an add-on NIC.

[nowinowi]

ok i already updated the bios =/ 
i don't know what checksum means ^^ but if you say so i have to buy an addon nic 

thanks for your help