theredviper Posted July 9, 2023 Share Posted July 9, 2023 Hi folks, I'm hoping to get some help with this error, I just noticed it but it appears my parity disk went offline a few days ago. I tried stopping the array, unassigning the device, then reassigning (it errored out and disappeared at that stage). I rebooted and the drive was visible again but still disabled when I tried to restart the array. The disk is the newest in the box, around 6 months old. I'm wondering if it's the disk or the controller that might be the issue. I haven't opened it up to reseat everything yet. Diagnostics attached, disk in question is sdf. tower-diagnostics-20230708-1902.zip Quote Link to comment
Solution JorgeB Posted July 9, 2023 Solution Share Posted July 9, 2023 There's a cable problem logged, replace the SATA cable and re-sync parity, if it fails post new diags. Quote Link to comment
theredviper Posted July 9, 2023 Author Share Posted July 9, 2023 Thanks I replaced the cable and restarted, for the record I had to: 1. stop array, remove parity disk, restart array 2. stop again, add parity disk back, restart array It is currently rebuilding. The disk has flagged 1 UDMA CRC error. Is this due to the cable, can it (should it) be cleared? Thanks again. Quote Link to comment
itimpi Posted July 9, 2023 Share Posted July 9, 2023 6 minutes ago, theredviper said: The disk has flagged 1 UDMA CRC error. Is this due to the cable, can it (should it) be cleared? The CRC errors (which indicate connection issues) never reset. You can only make sure they do not keep increasing. Quote Link to comment
theredviper Posted July 10, 2023 Author Share Posted July 10, 2023 Thanks all, parity was rebuilt successfully, so far so good. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.