Hi,

I found this error message in my logs:

 

Tower kernel: xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit

 

When I try: lsusb -t this is the output:

 

root@Tower:~# lsusb -t
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 10000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 20000M/x2
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M
    |__ Port 5: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 5: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 7: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 7: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 7: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 10: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
    |__ Port 12: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
    |__ Port 13: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 12M

 

Is there any way to fix that?

Got the same.

Nov 29 07:16:46 NAS kernel: usb 1-10: reset low-speed USB device number 2 using xhci_hcd
Nov 29 07:16:46 NAS kernel: xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
Nov 29 07:16:46 NAS kernel: usb usb3: root hub lost power or was reset
Nov 29 07:16:46 NAS kernel: usb usb4: root hub lost power or was reset

 

Ideas?

i see this too 

kernel: xhci_hcd 0000:14:00.0: xHC error in resume, USBSTS 0x401, Reinit

 

Do you know, what this is and came from?

I also have crashes with unraid, when i am running Windows VMs (mostly on Windows Update process)... could this be linked?