jonasdegent Posted September 2, 2023 Share Posted September 2, 2023 I have an Unraid server connected to a 10Gbit switch having a 10Gbit connection and a Synology server also having a 10Gbit connection connected to that same switch. Both have SMB shares. When I try to move files from my Synology to my Unraid and vice versa, I do this with Windows File Explorer, I get speeds under 100MB/s sometimes not even close to 50MB/s. When I iperf3 on both my 2 machines (both being a server and client), I get full 10Gbit/s speeds. I know there's a harddrive bottleneck but still, they should be at least getting that speed. Both have a SSD NVME Cache drive too (and WD Gold harddrives which are capable of at least a bit more than what I'm getting). I just don't know how to further investigate what could be wrong. Quote Link to comment
itimpi Posted September 2, 2023 Share Posted September 2, 2023 Where is the Windows system running? Does it have 10Gb networking? Wondering if that is what is limiting things? Quote Link to comment
jonasdegent Posted September 2, 2023 Author Share Posted September 2, 2023 (edited) I'm on a 2.5Gbe connection. But it also is connected to a 10Gbit port. I don't have the room for a 10Gbit card cause of the ridiculous size of videocards in this day and age 🙂 Edited September 2, 2023 by jonasdegent Quote Link to comment
itimpi Posted September 2, 2023 Share Posted September 2, 2023 19 minutes ago, jonasdegent said: I'm on a 2.5Gbe connection. But it also is connected to a 10Gbit port. I don't have the room for a 10Gbit card cause of the ridiculous size of videocards in this day and age 🙂 That is going to limit speed as each bit of data needs to travel to the PC from one server and then get sent to the other server. Having said that I would still expect better speeds. Have you tried iperf tests between each server and the PC? to get maximum speeds you need to transfer directly between servers. Quote Link to comment
jonasdegent Posted September 3, 2023 Author Share Posted September 3, 2023 Both go 2.37 Gbits/sec. So max speeds. Well that would be my next question: how would I achieve this, file transfer between the two? FTP? Or some other solution pref. with a GUI cause I can't automate the transfer. Quote Link to comment
Solution itimpi Posted September 3, 2023 Solution Share Posted September 3, 2023 2 hours ago, jonasdegent said: Or some other solution pref. with a GUI cause I can't automate the transfer You could use the Dynamic File Manager plogin on the Unraid side to do this I believe as it can mount remote shares. Quote Link to comment
jonasdegent Posted September 4, 2023 Author Share Posted September 4, 2023 Damn, I didn't know about Dynamix File manager and the Unassigned devices plugin. What a joy to use! Thanks this solved my problem! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.