pkoasne Posted September 2, 2023 Share Posted September 2, 2023 (edited) Hi, do I have bad cables? I started getting issues with multiple drives all at once but SMART seems to think (from what I can tell) that the drives are fine. Thank you. Edited September 2, 2023 by pkoasne Quote Link to comment
JorgeB Posted September 2, 2023 Share Posted September 2, 2023 It looks more like a power/connection problem, the only errors logged are with disk1, then it stopped logging, start with those cables and post new diags after array start. 1 Quote Link to comment
pkoasne Posted September 2, 2023 Author Share Posted September 2, 2023 I went through all the connections to everything. It appears to be stable now. I'll follow back up if needed. Thank you @JorgeB 1 Quote Link to comment
pkoasne Posted September 4, 2023 Author Share Posted September 4, 2023 (edited) @JorgeB issue came back. new logs attached. Thank you Edited September 4, 2023 by pkoasne Quote Link to comment
JorgeB Posted September 4, 2023 Share Posted September 4, 2023 Could still be a power/connection issue, but this LSI: 09:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] (rev 02) Subsystem: Broadcom / LSI SAS9300-8i [1000:30e0] Is using a very old firmware, and both disabled disks are using it, upgrade firmware to latest. 1 Quote Link to comment
JorgeB Posted September 4, 2023 Share Posted September 4, 2023 20 minutes ago, pkoasne said: Is it weird that this is only listing one of my cards? No, because the other one is a SAS2 model, it will only appear with sas2flash. 1 Quote Link to comment
itimpi Posted September 4, 2023 Share Posted September 4, 2023 21 minutes ago, pkoasne said: Is there a way for me to bring this disk back up without rewriting the contents? Only if you are prepared to lose all updates to it that were made since it has been disabled. You would also have to rebuild parity so no other drive must have problems. 1 Quote Link to comment
pkoasne Posted September 4, 2023 Author Share Posted September 4, 2023 Hopefully last question for awhile. Can you help me find the correct firmware for the other card? I'm having trouble: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 [1000:0087] (rev 05) Quote Link to comment
JorgeB Posted September 4, 2023 Share Posted September 4, 2023 That one is already using the latest firmware. 1 Quote Link to comment
pkoasne Posted September 4, 2023 Author Share Posted September 4, 2023 (edited) seems like there are still issues disk 7 seems to have read errors now but is not being shown as emulated Edited September 4, 2023 by pkoasne Quote Link to comment
Solution JorgeB Posted September 4, 2023 Solution Share Posted September 4, 2023 Disk dropped offline, looks more like a power/connection issue. 1 Quote Link to comment
pkoasne Posted September 4, 2023 Author Share Posted September 4, 2023 Thank you for your time and help Jorge & itimpi. I ordered some new power cables to try. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.