ChrisK2 Posted September 21, 2023 Share Posted September 21, 2023 I'm in the process of migrating from a single Unraid box to virtualizing it using Proxmox. I've installed Proxmox, created a VM and setup the pass through for the physical drives (not for the entire PCIe). Unraid boots and looks fine, but when I try to setup the disks, pointing the scsi-disk to where the previous physical disk was, it displays the message "Wrong" and "Parity device is disabled" and "Device is disabled, contents emulated". It doesn't allow me to start the array. My Proxmox setup: Unraid disk setup: How can I fix this, preferably without passing through the entire controller? (can't see it in the list and I want to add drives not used in Unraid to it). Quote Link to comment
itimpi Posted September 21, 2023 Share Posted September 21, 2023 1 hour ago, ChrisK2 said: I'm in the process of migrating from a single Unraid box to virtualizing it using Proxmox. I've installed Proxmox, created a VM and setup the pass through for the physical drives (not for the entire PCIe). Unraid boots and looks fine, but when I try to setup the disks, pointing the scsi-disk to where the previous physical disk was, it displays the message "Wrong" and "Parity device is disabled" and "Device is disabled, contents emulated". It doesn't allow me to start the array. My Proxmox setup: Unraid disk setup: How can I fix this, preferably without passing through the entire controller? (can't see it in the list and I want to add drives not used in Unraid to it). You may be able to fix it by using Tools->New Config and then specifying the new Id for them that is being generated as part of the pass-through mechanism. I am not a ProxMox user so cannot be sure that would work, but that does work for other emulators. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.