420swagxxx69 Posted October 3, 2023 Share Posted October 3, 2023 Hello Everyone, For the past few weeks (I know.. shame on me) I've received read errors in batches of 32 on both disk 3(sdf) and disk 4 (sdg) at random times. The first few times it occurred I ran a parity check and nothing came up but it seems I have finally hit the breaking point and Unraid has disabled disk 4 (sdg). Both of these Seagate Ironwolf 8GBs were purchased on the same day so I'm not so sure if it's a coincidence; They are both still well within the warranty window. They are connected to the machine with a 9201-8i, I've tried reseating the cables and swapping out the cable entirely (the other drives connected are fine) but saw no luck. I've noticed they also get up into the 45c range during the parity check while other drives are still sub 30c, not sure if this is an indication of anything. Your help is greatly appreciated onyx-diagnostics-20231002-2049.zip Quote Link to comment
Solution JorgeB Posted October 3, 2023 Solution Share Posted October 3, 2023 See here: Quote Link to comment
420swagxxx69 Posted October 4, 2023 Author Share Posted October 4, 2023 Thank you! I've given these steps a run and I'll give it a week or two, hopefully you don't hear from me again 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.