etnicor Posted October 4, 2023 Share Posted October 4, 2023 Hello, I wonder if anyone has experience from jmb585 from long term usage? Are they still holding up ? Have purchased a jmb585 card but am still abit nervous starting using them from my experience with Marvell sata boards in the past. Marvell boards used to work fine in the start but after some time of usage started corrupt data. This is the one I got. https://www.aliexpress.com/item/1005004358183286.html Quote Link to comment
JorgeB Posted October 4, 2023 Share Posted October 4, 2023 3 hours ago, etnicor said: Are they still holding up ? Yes, I have multiple of those in use for years now, no issues, of course can't speak for the actual model you got, only the JMB chip in general. Quote Link to comment
etnicor Posted October 4, 2023 Author Share Posted October 4, 2023 Thanks for input. Also found out Synology uses the chip in their nas boxes so I guess it's battle tested. Quote Link to comment
ConnerVT Posted October 4, 2023 Share Posted October 4, 2023 That board is basically the same as I've had in my server for the past couple of years (PCIe x4, 5 SATA ports). I've never had a lick of trouble with it, except for the junk SATA cables that came with it, which I tossed shortly afterward. Thinking about it, other than the case and power supply, it is perhaps one of the few things left from my original server build. 😋 Quote Link to comment
etnicor Posted October 13, 2023 Author Share Posted October 13, 2023 My board got io error after 3 disks had spun for 3 hours with io load. Maybe it got overheated, worked again after reboot. So my longterm test did not run long. Will have to put in a power hungry LSI card =( Got an 9217-8i and a 9300-8i will have to see which one is least power hungry. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.