snowmirage Posted October 23, 2023 Share Posted October 23, 2023 Earlier this week I had two drives, 1 parity one data, show up as disabled. Red X "device disabled". I shutdown, removed those devices, and installed new drives. They're still showing up disabled. I even moved one of the drives to a free slot in my 24 bay chassis same problem. Am I missing something simple? Or do I really have "part" of a cable (I say part as they are SPF 8087 cables between the SAS expander and the chassis backplane, so if one of the cables was bad some how I'd assume one whole "tray" of drives would be failing? Or Is the backplane of the chassis bad already? I've only had it a few months now, can you even get parts for such a case? I was able to run an extended smart self test on both drives which passed. phoenix-diagnostics-20231022-2137.zip Quote Link to comment
Solution itimpi Posted October 23, 2023 Solution Share Posted October 23, 2023 Replacing a disabled disk is not sufficient to remove the disabled state. To do this you need to rebuild them as if described here in the online documentation accessible via the Manual link at the bottom of the Unraid GUI. In addition every forum page has a DOCS link at the top and a Documentation link at the bottom. The Unraid OS->Manual section covers most aspects of the current Unraid release. Note that a drive being disabled does not necessarily mean there is a problem with the drive. More often than not it is a problem with the power or SATA cabling to the drive. Quote Link to comment
snowmirage Posted October 23, 2023 Author Share Posted October 23, 2023 Thank you (sincerely) itimpi for pointing me in the right direction, which was basically RTFM.... I've replaced so many drives in Unraid over the years I just assumed I remembered all the steps, skimmed over the first few and thought "O ya I remember this". Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.